This conference call transcript was computer generated and almost certianly contains errors. This transcript is provided for information purposes only.EarningsCall, LLC makes no representation about the accuracy of the aforementioned transcript, and you are cautioned not to place undue reliance on the information provided by the transcript.

ACM Research, Inc.
11/5/2026
Good day, ladies and gentlemen. Thank you for standing by, and welcome to the ACM Research Third Quarter 2026 Earnings Conference Call. Currently, all participants are in a listen-only mode. Later, we will conduct a question-and-answer session, and instructions will follow at that time. As a reminder, we are recording today's call. If you have any objections, you may disconnect at this time. I would now like to hand the conference over to your speaker today, Stephen Paleo. Please go ahead.
Good day, everyone. Thank you for joining us to discuss third quarter 2026 results, which we released before the U.S. market opened today. The release is available on our website as well as from Newswire Services. There is also a supplemental slide deck posted to the investor section of our website that we will reference during our prepared remarks. On the call with me today are CEO David Wong, our CFO Mark McKechnie, and Lisa Fang, our CFO of our operating subsidiary, ACM Shanghai. Before we continue, please turn to slide two. Let me remind you that the remarks made during this call may include predictions, estimates, and other information that might be considered forward-looking. These forward-looking statements represent ACM's current judgment for the future. However, they are subject to risks and uncertainties that could cause actual results to differ materially. Those risks are described under risk factors and elsewhere in ACM's filings with the Securities and Exchange Commission. Please do not place undue reliance on these forward-looking statements, which reflect ACM's opinions only as of the date of this call. ACM is not obliged to update you on any revisions to these forward-looking statements. Certain financial results that we provide on this call will be on a non-GAAP basis, which excludes stock-based compensation and unrealized gains and losses on short-term investments and beginning in... and beginning in the second quarter of 2026, its impact to net income attributable to non-controlling interests. For our GAAP results and reconciliations between GAAP and non-GAAP amounts, you should refer to our earnings release, which is posted on the IR section of our website and to slide 13. Also, unless otherwise noted, the following figures refer to third quarter 2026 and comparisons are to the third quarter 2025. I will now turn the call over to David Wang. David?
Thanks, Stephen. Hello, everyone. and we are come to ACM third quarter 2026 earnings conference call. We deliver strong results for the September quarter with a revenue of 37% and a shipment of 31%. We attribute the growth to one, market share gain and product cycle and two, good execution by our production and supply chain team. Growth was led by our ECP and advanced packaging categories. I'm especially pleased with the return to our growth for our cleaning categories. One, we are gaining market share with more cleaning steps and technology improvements. Two, our Lingang Mini line has helped our engineers to duplicate our customer production environment and deliver technology improvements to the market much faster. And three, broader adoption of our single wafer SPM solution across multiple customers. We are making good progress with our proprietary panel-level horizontal electroplating technology. In October, we announced the shipment to a customer in Asia of a 310x310 mm panel-level horizontal plating tool. We believe this is the world's first shipment of its kind, and it truly marks a significant milestone in our commercialization efforts. This follows earlier shipment of a larger 515 by 510 millimeter system to a mainland China customer. I will provide more detail on this later. I will now provide an update on our backlog. As reported by ACM Shanghai about a month ago, total backlog as of September 29th, 2026 was 2.5 billion US dollar, an 88% year-over-year increase. The backlog includes orders across all product categories with a heavier emphasis on our new products. Year-to-date orders through September 30 were up 147%. Thanks to good execution by ourselves, production, and the operation team, we continue to expect Shiman to grow faster than revenue for 2026. We remain confident in our growth profile. For 2026, we see a healthy backdrop for China WFE as our customers continue to scale their production capacity. We expect an extra boost for our business from several product cycles, including SPM and the furnace. Market share gains together with strong execution enable us to outgrow the China WFE market. We are optimistic that our newer platform will provide another source for growing as we expect the tract PCVD and panel-level horizontal plating to proceed from evaluation phase into commercialization phase beginning next year. Now onto our third quarter results. Please turn to slide three. Revenue was $368 million, up 37%. 343 million, up 31%. Gross margin was 41.6% and operating margin was 18%. And we ended the quarter with a gross cash of $1.3 billion and net cash $0.9 billion. Now I'll provide a detail on product. Please turn to slide four. Revenue from single wafer cleaning Tahoe and the semi-critical cleaning tool was $211 million, up to 16%, and represents 27% of revenue. ACM has developed one of the industry's broadest cleaning product portfolio, spanning a full range of critical cleaning and wet process steps. Our products, including Sabtebo, Maxonic, Tahoe, Backside Clinining, Solvent Clinining, Bevel Clinining, Scrubber, Wet Etcher, and our proprietary sulfuric peroxide mixing of SPM technology. Semiconductor devices are becoming more complex with additional process steps and more demanding cleaning requirements. We believe our broader portfolio of differentiated technology positions ACM to capture those growing opportunities. We are fully committed to our long-term target for 60% market share in China's Canadian equipment market. Our SPM product line is a key part of the target. As a reminder, we estimate that SPM tool represents about one-third of the total Canadian equipment market, and our product cycle is just now beginning to contribute. We recently introduced our enhanced version of our 170°C single wafer hot SPM system incorporating sulfuric acid recycling. The system achieves a 70% sulfuric acid recycle rate with a reasonable particle performance. This innovation is expected to reduce sulfuric acid consumption by approximately 400 tons per tool annually. delivering meaningful environment and operating cost benefits. In October at China International Industrial Fair, ACM Shanghai was presented with China International Industrial Fair Innovation Achievement Award for its single wafer high temperature SPM cleaning system. This is yet another award from a prestigious organization which further highlights the innovation and technology capability of our SPM platform. I'm pleased to repeat today that we are on track to ship more than 20 single wave SPM tools across multiple customers for the full year of 2026. Beyond SPM, we continue to expand the capability and application of other differentiated Canadian technologies. Our Ultra-C toggle now supporting additional web-edger and Morning Wave Reclaim application, providing customer with a greater process of flexibility and expanding the range of addressable application, especially in the reduction for fine particle less than 90 nanometer. We are also getting more traction with our supercritical CO2 Canadian technology. Our differential technology with a much smaller CO2 chamber reduce CO2 usage by 30%. as compared with other market solution. At the same time, we deliver better try-in performance. This is a strong combination and we are confident we can take a share with this product line and expanding application from DRAM to 3DNet and a logic application. Revenue from ECB, Furnace, and other technology grow 83% and represent 30% of a total revenue. Growing growth was driven primarily by strong momentum in both front-end wafer-level and back-end advanced packaging electroplating applications, with the firmness contributing to a relatively small portion. We see increased demand for electroplating for both logic and memory applications as semiconductor manufacturing and packaging become more complex. Our proprietary panel-level horizontal plating technology is a game changer for the industry. We began development for panel-level plating for more than five years ago, and the market is now coming to us. Our patent horizontal design enables highly uniform plating across the panel, including increasingly larger dimension substrate formats. Our 310 by 310 millimeter system supports Copper, Nickel, Tin, Silver, Gold plating process incorporates high-speed plating paddle technology and supports poor copper pillar exceeding 300 micron with a good within die uniformity. We have engaged with multiple customers across different region and panel size configurations. We also offer comprehensive set of wet processing tool for panel level packaging. including Ultra-C, Vacuum-P, Flux Cleaning, and Ultra-C, Bevel-P, Panel, Bevel Etcher, and Clean Tool. We are confident that ACM differential aided technology position us to enable next generation solution as driven by the increasingly complex 2.5D and 3D packaging roadmap for the global AI. Turning to our furnace business, we continue to make progress in expanding customer adoption We are advancing our capability across key applications, including silicon nitride LPCVD, polysilicon LPCVD oxidation, thermal ALD, and plasma-enhanced ALD, addressing opportunities across both memory and logic applications. We also supply high-temperature 1150 degrees C and ultra-high-temperature 1250 C annealing furnace especially address IGBT applications. As this system completes customer acceptance and the transition into production, we expect foreigners to make more meaningful contributions to our revenue in 2027. Revenue from advanced packaging, which excludes ECEP but includes service and spare parts, was up 71% and represents 13% of the revenue mix. This includes coder, developer, etcher, sweeper, scrubber, and vacuum cleaning tools, supporting a broader range of advanced packaging applications. We are particularly pleased with our global progress here, with active deployment in Singapore and North America across a range of those tools. We believe our broader product portfolio and expanding global customer relationships provision us well to capture additional opportunity as we continue to grow this business. Turning to our TRAC and PECVD platform, we have made progress with customer evaluation and initial deployment of our next generation system. For TRAC, our focus remain on delivering industrial leading throughput and competitive process performance, addressing opportunity in KRF lithography, across the standalone system and configuration integrated with the discography scanners. For PECVD, we believe our differentiated chamber architecture, electrostatic chart design, and RF power source technology provide important advantages in throughput and process performance. We are working closely with a key customer to demonstrate the performance and the capability of both platforms. Looking ahead, we expect additional shipment in 2027 with revenue contribution and expected as customer qualification and production adoption progress through 2027 and into 2028. Next, I will provide the update on global manufacturing and operation infrastructure. First, Ling Dong, please send to slide eight. Our first lingang building continues to operate in volume production, and we are currently ramping up our second building. Together, the two buildings can support up to $3 billion in annual output, providing a significant capacity to scare our business over time. I'm pleased to report that we expect Siemens in the fourth quarter of 2026 to increase from further quarter levels. and we also plan for good growth in Siemens for 2027 and beyond. Next, our Oregon facility, Princeton 2009. We are preparing for the official opening of our Oregon operation very soon. This is an important milestone to support customers outside mainland China. The facility including Class 100 cleaning room to product demonstration and customer evaluation, along with the cleaning room for storage, pre-assembly, manufacturing, and technical support capability. We believe U.S.-based demo lab and production facility will support our effort to scale our global business. In addition, we continue to strengthen our operation across Asia. In Korea, we are expanding the capability of ACM Hangoku, including manufacturing, engineering, and technical supporting resource to serve our growth International Customer Base. And in Singapore, we are adding local resources to support customer installation, service, and ongoing technical engagement. Our global business continues to gain momentum. As we discussed last quarter, we expect to have more than 20 tools in store at the customer site outside mainland China by year-end 2026. represent approximately 10 customers across five countries. We are particularly encouraged by our progress in North America, Singapore, and other parts of Asia, where our global sales and service team are expanding customer relationships and supporting deployment across a growing range of products and applications. This engagement is helping us establish a stronger foundation for future business as customers gain experience with our technology and evaluate the opportunity for broader adoption. The progress we are making demonstrates the competitiveness of our technology and their position at ACM for meaningful long-term growth outside mainland China. Now I will provide our outlook for the full year 2026. Please send to slide 10. As a result, good execution by ourselves and Operation Team, significant backlog and several major product cycles, we are raising our outlook as follows. We now expect the 2026 revenue to be $1.24 billion to $1.28 billion, up 38% to 42% year over year. This compares to our previous range of $1.125 billion to $1.175 billion. We continue to expect full-year shipment growth to outpace revenue growth. We believe our expanding differentiated product portfolio, global infrastructure, and global customer relationships position ACM to capture new market opportunity and advance toward our long-term revenue target of $4 billion. With that, let me turn the call over to Mark to review our financial results in more detail.
You're reading a preview of the ACMR Q3 2026 earnings call.
Free account.
Want transcripts like this in your own app? Try the Earnings call API, or read the transcript API docs.
Use this data in your own app
Pull this call's transcript, audio and slides with the Earnings call transcripts API.
See pricing