speaker
Operator
Conference Call Operator

Hello everyone, thank you for joining us and welcome to the Beta Technologies third quarter 2026 financial results conference call. After today's prepared remarks, we will host a question and answer session. If you would like to ask a question, please press star 1 on your telephone keypad. I will now hand the call over to Devon Rothman, Head of Investor Relations. Please go ahead.

speaker
Devon Rothman
Head of Investor Relations

Thank you, operator, and good morning, everyone. Thank you for joining us for Beta Technologies' third quarter 2026 earnings call. Joining me today are Kyle Clark, our founder and chief executive officer, and Herman Cueto, our chief financial officer. Following their prepared remarks, we will open the call for Q&A, where Kristen Costello, our head of government and regulatory affairs, will also join us. Earlier today, we issued a press release announcing our third quarter 2026 financial results, as well as an investor presentation, which are both available on the investor relations section of our website. Before we begin, I'd like to remind everyone that today's discussion will include forward-looking statements within the meaning of securities laws. These statements are based on our current expectations and assumptions and involve risks and uncertainties that could cause actual results to differ materially. Please refer to our filings with the SEC for discussion of these risks. We will also reference certain non-GAAP financial measures. Reconciliations to the most directly comparable GAAP measures can be found in our earnings materials. With that, I'll turn the call over to Kyle.

speaker
Kyle Clark
Founder and Chief Executive Officer

Thanks, Devon, and good morning, everyone. On our last call, we covered the MV250 debut at Farnborough, EIPP launch with United Therapeutics carrying organs, motor certification policy interpretation issues, and an aircraft backlog approaching the year-end goal of $4 billion. This morning, we will cover the commercial, military, and certification momentum and financials through this last quarter. Quarter three was the strongest revenue quarter in beta history. We beat the midpoint of our Q3 guidance by more than 50%. We also crossed more than a quarter million nautical miles of electric flight. We launched service in six EIPP sites, including Florida, this past week. Our exceptionally strong partnership and collaboration with GE continues to make us a better company, and in September, we beat delivery promises to Embraer Eve's program. We also hosted Chairman Yovanovitch from the XM Bank and continued to advance the $830 million financing package to fund our domestic manufacturing and vertical integration expansion. More recently, on October 16th, we earned the FAA Market Survey Airworthiness Certificate for the ALEA A250 November 250 X-ray Tango, marking the first electric eVTOL aircraft in history to receive one. Four days after receiving this authorization, we flew the first vertical-to-vertical market survey flight. New York to Vermont, across Lake Champlain. It was a 34 nautical mile flight in less than 20 minutes. That's a drive that typically takes an hour and a half and includes a ferry. A few years ago, Beta was the very first to fly piloted eVTOL transition flights on full-scale aircraft. We were the first to produce a training-compliant eVTOL and qualify many pilots to fly. And now, we are the first to earn an FAA authorization to give prospective customers the experience of an eVTOL aircraft through vertical takeoff, transition to wing-borne flight, and Vertical Landing. Getting here has required years of work. Each step builds on the foundation for the next. Our maniacal focus on simplicity has driven this progress and it remains central to how we certify, manufacture and commercialize our aircraft. As the EV toll industry advances towards certification and commercialization, FAA authorizations provide concrete and objective measures of progress. This authorization had several prerequisites. We had to show stable flight in every corner of the flight envelope covering all flight load cases and speeds. We had to show stability in all wind conditions, both vertical and runway landings. We had to produce maintenance manuals and implement a maintenance program. Most importantly, we had to have a stable aircraft configuration across a meaningful number of flight hours. A focus on the customer has led us to a deliberate choice to remove complexity. No liquids, no gearboxes, no complex software algorithms, no extra blades, no thrust vectorings, no propeller actuators. Simpler systems have fewer failure modes. Fewer failure modes means the aircraft is available when the operator needs it, and it is generating revenue. Beta now holds an FAA market survey authorization for both our CTOE and our VTOE aircraft. Both are built on a simple, common platform, sharing the same wing, tail, flight controls, systems, motors, and batteries. They are manufactured on the same production lines. That commonality allows progress in each certification program to support the other. Shifting to our defense business. In September, the CX-300 flew at the Miramar Air Show by invitation. We were the first electric aircraft to fly at that military air show. The hybrid and autonomous MV250 was on static display, and our prospective customers really dug into the detail of the aircraft. The response we are hearing from the defense community is direct and consistent. There is an existing capability gap we can fill with longer range, faster speeds, a very small logistics tail, autonomy, and we can do it at a significantly lower upfront and recurring operational cost. The MV250 builds on our commercial A250 platform, sharing its wing, tail, electric motors, flight controls, and other core systems, achieving near total technical commonality. By adding the Sikorsky Matrix autonomy and the GE Beta turbo generator for hybrid operation and a fuselage designed for uncrewed military missions, we deliver enhanced military performance without the time and cost of a clean sheet design. This foundational dual-use architecture allows the MV250 to immediately inherit the manufacturing economies of scale, an existing supply chain, and the flight time from our commercial programs. We've had very strong engagement at all levels of the armed services, and we've seen commercial demand for hybrid and autonomous systems as well. We are currently assembling our second hybrid VTOL aircraft with the components for a third demonstration aircraft coming together. We will have more to share soon. Transitioning over to our EIPP projects that went live since our last call, we now have launched six of the seven programs that we were awarded. We brought the aircraft to the customer operations. We flew their routes, their schedules, and their conditions. We showed them what dispatch reliability looks like when there's no fuel system, no hydraulics to troubleshoot, and no oil to change. We flew in good weather and in bad weather. We showed them a very low cost per flight hour. We showed up early, quietly tested the routes, and delivered in every case. With these selections live, cargo moving, and medical transport happening, operators are building the institutional knowledge that will turn a pilot program into long-term commercial relationships. Phase one of the EIPP is about three things. One, proving mission closure. Two, demonstrating measurable cost savings. And three, building a record of safe and reliable operations. We are generating the data that will inform the policy for this entire category. Our components business continues to grow faster than we forecasted and has its own $1 billion backlog. We put our motors, batteries, flight control computers, and other systems into other companies' aircraft, potentially creating long-term service and parts relationships. We are presented with many more opportunities that we take. We run each of these opportunities through a rigorous evaluation to ensure it's aligned with Beta's overall development and commercial strategies. We have also recently invested in large format composite manufacturing capabilities. We are building FAA conforming composite and metallic structure for our flight test aircraft. We have brought precision, traceability, and quality controls together on the factory floor. We have consistently made the strategic choice to spend capital on vertical integration. It isn't only in composites. It's also in the motors, the batteries, and the flight control computers. This vertical integration has allowed us to move extremely quickly and keep our cost of bill of materials in check. Our loan application with the Ex-Im Bank for an additional $830 million financing package continues to advance to support our vertical integration and production. We expect to be the first company in advanced air mobility to reach a maturity level that allows access to this scale of non-dilutive debt capital. On to KPIs. At the beginning of this year, we set five aggressive year-end targets, book $4 billion in aircraft backlog, cross a quarter million nautical miles of flight, secure 150 charging sites, prove a 4.5 aircraft per month production rate, and advance certification. Today, Two months early, three of the five are complete. Our commercial aircraft backlog stands at just over $4 billion, with over 1,000 aircraft in firm and option orders backed by financial commitments. Our recent sales focus has been on securing high-quality medical and cargo CTOL customers to support a successful entry into service. airline customers continue to struggle with high fuel prices and are watching the EIPP missions closely, specifically for the realized cost savings. Our sales organization has successfully established a service and support organization, and they've developed a comprehensive forecasting and aircraft data awareness application called Beta Operate. This will be the backbone of the customer support channel into Beta in the future. As of this call, we have crossed a quarter million nautical miles flown. When we set that target, we thought it was achievable but hard. The all-weather IFR capability, high reliability, and high dispatch rates are the drivers behind us reaching this goal more than two months in advance. The aircraft have been flying in the snow and the sleet here in the Northeast. They've been to New Zealand, Australia, Japan, Hawaii, across the country many times, into Florida humidity, into the desert, into the Arctic, and the Nordics, 14 countries in total. The exposure to a variety of environmental and operating conditions has made our aircraft better. We're at 168 charging sites, ahead of our year-end target of 150. These aren't urban showcased installations. They're in the communities our EIPP operators serve. Hospitals, regional airports, emergency response staging areas. That infrastructure is where the missions are. In manufacturing, we continue to make meaningful progress towards our target of demonstrating a production capacity equivalent to 4.5 aircraft per month. Our focus at this stage is on establishing and validating the manufacturing capability we will need when we ramp production on certified aircraft, rather than staffing for sustained production at this rate today. We've already demonstrated capacity of 4.5 aircraft per month across several key vertically integrated component lines, including flight control computers, battery packs, wire harnesses, and inverters. We're now extending that work across our major airframe structures through targeted pulse builds. Our highest manufacturing priority remains in the production of fully conforming flight test aircraft in support of certification, which requires additional FAA oversight, inspection, and part traceability. are making deliberate investments in capacity while prioritizing those critical certification builds, with the underlying manufacturing infrastructure targeted to be in place by year-end and additional rate demonstrations continuing into early 2027. This approach positions us to scale production efficiently as we acutely manage our direct labor and material costs, and it positions us to add direct labor at the right time. Turning to our H500A certification program, We continue to complete and submit four credit testing documents and data to the FAA. Durability and lightning testing are complete. Software development is substantially complete with all runs performed on four credit tests of the software. We are through the hardest phases of the engine program and carrying what we learned directly into our other programs. We have aligned with the FAA on how to demonstrate compliance across every test area. Reaching this level of progress put us in the right positions to move forward formally with our next engine certification project. We submitted the H500B amended type certification application earlier last month. Through early engagement with the FAA, we have confirmed conceptual alignment that the B is a derivative product and will be an amended type certificate. The B will follow the path the A has paved. while introducing improvements in cost, performance, weight, and producibility. I want to also provide an update on our CX-300 program. The certification plans we need to start early system testing have all been accepted by the FAA and testing is underway. We continue to host FAA pilots for the flight familiarization activities that help us move towards type inspection authorization, or TIA. The aircraft we are building today will have operational use cases well beyond certification tests. In a moment, Herman will walk through the implications of how we account for this, which also reflects the maturity of our programs as we transition towards commercial operations. On the A250, beyond the market survey certificate, two regulatory developments moved in our direction. The noise testing we conducted jointly with Penn State and the FAA came back strong. The FAA is using that data to find the noise requirements for this aircraft class and inform the rules. And the FAA published its safety continuum policy towards power lift aircraft. The safety levels it establishes confirm the cross-platform compliance approach we designed into the CX-300 and A250 from the start. The team here at Beta has kept their heads down, focused on the quiet work of certification, production quality, and safety of flight data. We've earned the respect and trust of the best in aerospace, and our partnerships with GE Aerospace, Embraer E, General Dynamics APS, and others are strong and growing. The current administration has been very supportive of the AAM industry. The leaders in the FAA continue to reduce unnecessary friction while prioritizing simple, reliable, and safe aircraft. At the start of this year, we told you what we were setting out to do. Quarter million nautical miles, 150 charging sites, and $4 billion in the backlog. Today, I can say confidently, we did those things with time to spare. Our focus is being rewarded and our strategy is working.

Want transcripts like this in your own app? Try the Earnings call API, or read the transcript API docs.

Disclaimer

This conference call transcript was computer generated and almost certianly contains errors. This transcript is provided for information purposes only.EarningsCall, LLC makes no representation about the accuracy of the aforementioned transcript, and you are cautioned not to place undue reliance on the information provided by the transcript.

-

-

Use this data in your own app

Pull this call's transcript, audio and slides with the Earnings call transcripts API.

See pricing

9,000+ companies · REST API

Investor presentation