This conference call transcript was computer generated and almost certianly contains errors. This transcript is provided for information purposes only.EarningsCall, LLC makes no representation about the accuracy of the aforementioned transcript, and you are cautioned not to place undue reliance on the information provided by the transcript.

SSAB Ab
10/28/2026
Good morning and welcome to the presentation of the SSAB Q3 report. My name is Per Hillström. I'm head of Investor Relations at SSAB. And presenting today, we have our president and CEO, Johnny Sjöström, and also our CFO, Leena Craelius. And the agenda, Johnny will start by going through the quarter in brief. Leena will present more details on the financials. And then Johnny will close up with the outlook and the summary. And after that, we will open up for questions. So by that, Johnny, please start.
Thank you very much, Per, and good morning to all of you. I'd like to summarize the Q3, and I will, as usual, start with health and safety. And as you can see on the graph to the left, that we have a good trend where our lost time injury frequency is continuing to go down. A very remarkable work by the whole organization changing the culture related to safety. I also want to point out the total recordable is at 4.8, which is record low for SSAB, an area we will continue to work on and try to strengthen as we move forward. And then when we look at our financial performance, you can see that Q3 ended up on 3.3 billion Swedish kronor, which is better than Q3 last year. Somewhat lower than Q2, but we have to remember that Q3 is a typical period Thank you very much. but as well as within special steels. So those are things that I want to highlight. And if you look at our net cash position, and I guess that Leena will comment on that later on in her part of the presentation, we still have a very good and stable balance sheet, a very strong net cash position. Now, a few comments on our investment program. So the conversion or the transformation in Oxusund where we are replacing our blast furnace with an electric arc furnace is progressing really well. We are planning for production startup in Q2 next year, so it's actually around the corner. And then we also have the work in Luleå with the mini mill or what I would like to refer to as the mega mill. It remains on time and budget. But I also want to highlight that with projects of this size, there are a lot of things that is challenging. And we have had some issues in the beginning of the project, things that we couldn't foresee. And with projects at this size, there are things that will always come up that we couldn't really prepare ourselves for. But I also want to point out that this investment is extremely important for the future of SSAB. It is in line with our strategy to accelerate our premium leadership. And it's a product that goes directly into the automotive industry, especially for the electrical vehicles, to help them to become lighter, which is a requirement from the market. And then, of course... We also had a groundbreaking ceremony a few weeks ago in Oxozone. It was a new quenching line that we are planning to construct. That's going to give us more capacity to produce the most advanced quenched and tempered material within special steels. We have a very strong underlying demand from the defense industry and the mining industry. So it's important for us in order to grow with the customer demand. And also we're expanding the capacity to be able to produce more powder for additive manufacturing. Now, if we go into the divisions, we can see that the shipments within special seas were higher than they were Q3 last year. So that's a very good thing. We could also see that the prices were higher than they were Q2 this year. So both shipments and prices are good. But then if you look at the profitability, you might wonder why the profitability is lower than Q3 last year. That's mainly related to cost increases we've seen in alloys, transportation, and to some extent in natural gas, etc. So that has been sort of offsetting. We're not super concerned about this. We know that our prices are going to continue to go up. There is a delay, and for special steels an even longer delay than there is for other divisions. So we know that the price increases will offset sort of the cost increases going forward. I think it's still a very stable performance by special steels. There's a very strong underlying demand, so I'm very optimistic for the future. Now looking at SSAB Europe, the shipments came out on a higher level than they were Q3 last year. And especially I'm very happy with the amount of premium steels that we're selling, which I commented on in the beginning, the advanced high strength steels that goes into automotive industry. Automotive industry that is shrinking on the European market, but still we're able to grow on a shrinking market. So it shows that we have a very good competitive advantage and that we create unique customer value. Prices have been increasing for SSAB Europe. We came out on a decent financial performance. We have to remember that in Q3 we also have maintenance that's affecting the cost, but as well as affecting the deliveries. But I think still a decent performance. And then if you look at SSAB Americas, the volumes came out pretty much in line with what it was Q3 last year, stable performance. And for those of you who are following the CRU prices, you can see that the CRU price have been moving up very rapidly. And having in mind that we are the second largest plate producer in the U.S. market, a market with underlying demand is still very, very strong for heavy industrial applications, energy, oil and gas, etc. So we have a good combination of a lack of competition, but at the same time, a strong underlying demand. Our prices went up higher than we guided for. It was roughly 8%. We're not super surprised about that. But also have to remind you, we have a delay because of the contract structure that we have. So even if the CRU prices are moving up, it's only 20% of what we sell in the United States, which is sold on spot. So there is a delay for us. And once again, if you compare our Q3 performance compared to Q3 last year, we have maintenance every other year. So that's the reason why we came out lower Q3 this year compared to Q3 last year. Just worth pointing out. And then we have the two subsidiaries we have, starting with Tim Noor, where the shipments were somewhat lower or in line with Q3 last year. And then if you look at our financial performance, it was considerably strong and it was last year. But then again, Tim Norris benefiting for prices going up and that also has an impact on their inventory. So that's on the positive side. And if you look at rookie construction, We haven't really seen an improvement in the construction segment. They are still working on a low demand situation in the market. Still, the revenues are very much in line with what it has been in the past. And I think that they came out on a decent level when it comes to the financial performance, higher than it was last year and also higher than Q2. But they are not having the same benefit from the inventory re-evaluation. So with that, Leena, I leave the word over to you.
Thank you, Jonny. A bit more details and also Jonny mentioned a few things that I'm going to repeat here. But as the headline is saying, improved earnings versus Q3 last year, all the graphs are illustrating improvement in shipments, revenue and profitability. But let's begin with shipments. Q3 outcome, 1,530 kilotons. Clear improvement compared to previous year by 64 kilotons and 4% and the seasonality as already mentioned with the maintenance outages is showing that the reduction compared to Q2 was 230 kilotons and 13%. We were guiding significantly lower shipments in special steels in Europe as well as lower in Americas and this was in line with the guidance. Then if we look at the revenue, 25.6 billion reduction compared to Q2, 1.9 billion and 7%. When shipments are going down 13% and revenue only 7%, it's indicating that the prices did develop upwards during Q3. EBITDA performance in relative terms stable 13% year on year but in absolute terms we can see the improvement 0.4 billion as we can see improvement in the EBITDA per ton performance. Then a bit more detailed analysis, bridge analysis comparing operating result Q3 versus previous quarter. Seasonality already mentioned, but a good performance with prices. The biggest increase took place in Americas by 8%, and then Special Steels and Europe Division increasing prices by 3%. Both Ruki Construction and Tipno also increased their prices. Only minor impact here with the positive FX that was only impacting 2%. Volumes lower, already mentioned seasonality. Europe division 160 kilotons lower, special steels 44 and Americas 27 kilotons lower. And as already mentioned, maintenance impacting this. Variable cost, here we see an increase and here a bit sort of a diverse development. In Europe division, we have seen that the pellet premium has started to climb up. We have higher logistics and sink and paint cost. In America, the majority of this negative impact is related to change in inventory. Inventories came down during the maintenance audits. And in special steels, already mentioned here, we had higher iron ore, coal, alloys and logistics cost, while the scrap cost was slightly lower in Alabama. Fixed cost, positive impact, seasonally always, Q3 tends to be such. We have lower personnel and external services cost. And then the capacity utilization, yes, related to maintenance outages, we didn't have any outages during Q2 as we did during Q3. So the crude steel and rolling production was around 10% lower quarter on quarter. And then a comparison against previous year and here we can see the improvement in the profitability performance. Prices have developed upwards and here the biggest increase took place in Americas by 12% year on year. Contributing 590 million to this positive EBIT impact. Then followed by both Special Steel and Europe division where prices went up 4% and impacting both divisions where contributing 330 million SEK here. Also Ruukki Construction and Tibno have succeeded to increase prices. Shipment volumes also positive impact by 64 kilotons, and here Special Steel Division has increased by 8%, followed by Europe Division 4%, while as Jonny already referred to, Americas was rather stable year on year. Also to point out that Ruki Construction and Tipno, they were somewhat lower in their volumes year on year. Variable cost also negative impact in this comparison, especially with the Americas with higher maintenance related cost and also higher scrap cost is contributing a big part of this. In special steels, we have seen higher alloys, CO2 emission allowance cost and logistic cost. And then in Europe also higher CO2 cost alloys, sink and logistics. Fixed cost, minor negative impact here. We have some higher personal related cost and higher external services and also some higher rental cost. Capacity utilization with positive impact and this is mainly seen in Europe division where we have around 15% higher crude steel and rolling production. But to remind that last year we had more extensive maintenance audits in Luleå compared to the maintenance audits this year. If we then continue with the cash flow, if we compare Q3 this year versus previous year, very similar trend when it comes to EBITDA performance, higher this year compared to last year. Similar trend in change in working capital, positive impact, even better than last year. Maintenance related, CAPEX was fairly stable and similar compared to last year. And to remind that this other item or line here is related to CO2 emissions spent that we are doing throughout the year. And then the strategic expenditures slightly higher compared to last year and I will get back to the guidance later on. But all in all good operating cash performance. This led to strong net cash position, 8.4 billion, which leads to the gearing minus 11%, which is still very well in line with our financial guidance, plus minus 20%. And to remind that we did pay out the dividend during Q2, amounting to 2 billion. Raw materials, as the graph is illustrating, let's start with the iron ore has been rather stable throughout the year, but to point out that the pellet premium has been going up quarter by quarter, and we see that it continues to go up also during Q4. Coke and coal prices, as the graph is illustrating, have been developing upwards during the year, perhaps starting to move more sideways, but definitely this is impacting the cost of all the Nordic mills. And then the scrap cost also. The trend, as illustrated in the graph, has been higher this year compared to last year. And it tends to be that towards year end, the trend, as also last year shown, it tends to go upwards just before year end. And perhaps to point out, which is not illustrated on this slide, we have seen rather significant increase in alloys cost during this year, sink and paint cost, and of course, the logistic cost has been going upwards. And also to summarize the cost impact of CO2 emission allowances, On group level, last year the cost impact was around 600 million SEK, while this year the cost impact will be close to 2 billion. So there is a significant increase in CO2 emission allowance cost and mainly of course hitting the Europe division and to some extent special steel division as well. Maintenance cost, this table we have not updated since last time we were showing this. During Q3 the planned maintenance outages have been going according to plans and to bear in mind that these will continue during Q4 in all steel divisions and thus impacting the volumes as well as the cost. and then the CAPEX guidance and this time we actually updated the guidance for this year. Previously we've been guiding for 13.5 billion and we have reduced it for this year by 2 billion and if we split this strategic CAPEX 8.2 biggest portion is then related to Luleå 4.2 billion and Oxelösund just below 3 Alabama Meal 0.3 and then the rest is split to other smaller strategic investments. And to highlight that this update is related purely to the timing of the invoicing. And then also no change in the net cash impact when it comes to CO2 emission allowances. We continue to purchase the allowances. And the estimate is that it will be on a similar level as last year, around 780 to 800 million SEK. And no change in the digital roadmap plans that we have around IT projects. We continue to spend around 200 million more, or yes, more compared to 25, so that continues to be the same as previously communicated. But with this, I give it back to Jonnik.
You're reading a preview of the SSAB-A.ST Q3 2026 earnings call.
Free account.
Want transcripts like this in your own app? Try the Earnings call API, or read the transcript API docs.
Use this data in your own app
Pull this call's transcript, audio and slides with the Earnings call transcripts API.
See pricing