This conference call transcript was computer generated and almost certianly contains errors. This transcript is provided for information purposes only.EarningsCall, LLC makes no representation about the accuracy of the aforementioned transcript, and you are cautioned not to place undue reliance on the information provided by the transcript.
spk11: Hello and welcome to Array Technologies' fourth quarter and full year 2022 earnings call. At this time, all participants are in a listen-only mode. To ask a question, press star 1 on your telephone keypad. A question and answer session will follow the formal presentation. As a reminder, this conference is being recorded. It's now my pleasure to turn the call over to Cody Mueller, Investor Relations at Array. Please go ahead.
spk15: Good evening, and thank you for joining us on today's conference call to discuss Array Technologies' fourth quarter and full year 2022 results. Slides for today's presentation are available on the investor relations section of our website, arraytechinc.com. During this conference call, management will make forward-looking statements based on our current expectations and assumptions, which are subject to risks and uncertainties. Actual results could differ materially from our forward-looking statements and if any of our key assumptions are incorrect. We identify the principal risks and uncertainties that may affect our performance in our reports and filings with the Securities and Exchange Commission, which can also be found on our investor relations website. We do not undertake a duty to update any forward-looking statements. Today's presentation also includes references to non-GAAP financial measures, You should refer to the information contained in the company's fourth quarter press release for definitional information and reconciliations of historical non-GAAP measures to the comparable GAAP financial measures. With that, let me turn the call over to Kevin Hostetler, Array Technologies' Chief Executive Officer.
spk16: Thanks, Cody, and welcome, everyone. In addition to Cody, I'm also joined by Nipal Patel, our Chief Financial Officer, and Erica Brinker, our Chief Commercial Officer. Let's begin on slide four where I will provide some highlights of our fourth quarter and full-year results. We closed out 2022 with continued strong performance as revenue, adjusted EBITDA, and adjusted EPS were all above the midpoint of our previously issued full-year guidance. Despite the continued module availability challenges and a number of site closures due to weather late in the year, we were still able to deliver revenue in the quarter, of $402 million. This represents an increase of 83% from prior year's fourth quarter, of which 22% was organic growth within our legacy array segment. This puts our full year revenue at $1,638,000,000, which exceeds the high end of our guidance range for the year and represents organic growth of nearly 50% and total growth of 92% from 2021. It is important to take a minute and put that growth in context. 2022 was a year marked with consistent module availability challenges, from WRO in the beginning of the year to ADCVD in the spring and summer, and finally, the UFLPA in the second half of the year. The design of our tracker system, where we do not require pre-drilling into the torque tube, allowed our customers to make more flexible approach to the design of their sites in close conjunction with our applications engineering team. In instances where module availability was unknown during the design process, Array was able to support customers by designing a site with multiple module options. This ensured that as soon as modules became available, the time to install was greatly reduced. This is a testament to not only the unique design of our products, but also to our in-house engineering expertise. As I move down to gross margin, I'm happy to report that for the fourth quarter, our total company gross margin was 20%, which represents over a 1,500 basis point increase from the fourth quarter of last year and is well within the high teens to low 20s benchmark we established as an exit point for 2022. This brings full-year gross margins to 13.9%, which is a 420 basis point increase from the prior year gross margin of 9.7%. Almost two years ago, when our company felt the impact of the rapid rise in commodity prices, we moved quickly to change the way that our business operates to minimize the potential future impact of rapidly escalating commodities. We also outlined our path to get back to our historical gross margin profile. This quarter marks an important closeout to that journey as we are finally back into the range that we would expect as a baseline gross margin for the business. As we move into 2023 and beyond, I'll be happy to no longer address the impacts of those legacy priced contracts to our gross margin. On the back of the volume growth and improved profitability, adjusted EBITDA for the quarter grew to $52 million, up from half a million in the prior year. and for the full year grew to $129 million, up from $43 million in 2021. This means our adjusted EBITDA in the fourth quarter of this year was higher than the full year in 2021. This is an indication of just how far our company has come in a short period of time. Finally, we delivered $131 million of free cash flow in 2022, anchored by $86 million in the fourth quarter alone. The results here are indicative of our intense focus on both improving our profitability and our working capital efficiency. As we wrap up 2022 and move into 2023, we do so with a lot of momentum. Our growth is undeniable. We have the largest market share in the U.S., which will have significant volume gains in the coming years. Our margins are the best in the industry, and we have solidified our balance sheet and liquidity to position us for future growth. Now let's move to slide five to talk a little bit more about future growth and the state of the industry, both here in the US and in the rest of the world. Starting first, the more near-term outlook here in the US. Our volume outlook for 2023 still supports a healthy level of growth despite ongoing uncertainty in a couple of areas. First, the UFLPA has shown some recent positive signs of improvement, but the fact remains that module availability is still a concern to our customers until we get to a more final resolution. We will continue to approach forecasting the impact to us in a similar fashion as before, assuming a slightly slower conversion of projects as we work to offer flexible solutions to our customers. And second, the timing of demand acceleration from the implementation of the IRA domestic content provision. Projects are still moving forward in what we would say is a status quo manner, Meaning we have not yet seen an acceleration of new projects, but are still seeing a steady level of order activity as demonstrated by the roughly $500 million in orders received in Q4. While there are some other dynamics at play here, like permitting, labor availability, et cetera, the main feedback we get is that there needs to be clarification from the Department of Treasury on what qualifies as domestic content under the IRA. For developers that have some flexibility in their project timing, it is worth waiting to ensure they maximize the returns from this provision. Once we do have resolution in this provision, we would expect to see order activity increase. On the manufacturing credit side, we remain consistent with our belief that there is a roughly 15% of the overall tracker price worth of value in these credits. This estimate does not include our clamping solution, which if included in the final guidelines, would be an incremental benefit. However, we still do not know the timing of when the credits can be applied for and what the ultimate transferability will be. Because these credits are retroactive, applicable to January 1st of this year, we certainly expect some benefit from these credits, but we can't yet estimate what the value will be or where it will show up in our financial statement. Due to the uncertainty in these two areas, we have made the determination not to include any potential direct benefits from the IRA to our profitability in our 2023 guidance range. When we do receive more clarification, we will provide as much transparency as we can into the financial impact tool array. As we look past 2023, there are a couple of observations that I believe are important to point out. As has been true for a while now, the long-term demand health in the industry remains incredibly strong. We expect that solar energy will become a 50-state solution and that it will lead to an increase in the geographic diversity of the sites that will be built. This means more challenging terrains and weather conditions will become the norm, not the exception. For tracker companies, it will be increasingly important to offer a diverse set of products in order to maximize the site's energy output. In the next slide, I will outline how exactly we are going to do that at Array. Finally, with the level of transparency and sharing of benefits that will occur in the industry due to the IRA, it will be difficult for industry participants to maximize their returns with transactional relationships. Long-term partnerships across the supply chain will be key. We are confident that the strategic relationships we have built over years and years will enable us to maximize our benefits under this bill. If we shift towards our non-U.S. business, there is also a lot to be excited about. In Brazil, we expect to see a strong 2023 as many large utility-scale projects move forward post-election. This will augment our already strong distributed portfolio in that region to help deliver healthy growth. Another bright spot for us is in Australia. We just announced our VRET2 win on the Glen Rowan project, which was predicated on being able to provide locally sourced products. It is important to note that we were the first tracker company to establish this local content footprint, which we expect will allow us to take advantage of the growth in this region over the coming years. Western Europe continues to see steady installations But we have yet to see a true catalyst for growth like the IRA here in the US. With the energy dynamics in the region, it is hard to imagine that accelerating growth in the utility scale solar is not coming. But until it does, we expect relatively tempered growth in the near term. And finally, we are constantly evaluating new geographies. But we will continue to do so in a methodical and disciplined way. ensuring that any market we get into is one where we have a strong value proposition and that we can maintain the strength of our margin profile. Being successful in this expansion, both in the U.S. and outside of it, will be highly dependent on products and services we can offer to our customers. If we turn to slide six, I'd like to provide some additional color into our portfolio of offerings. With our announcement late last year of two additional product offerings, OmniTrack and the H250's availability for the U.S. market, we offer our customer a broad set of trackers. With our flagship Duratrack product, we are still the only tracker provider who can offer up to 32 linked rows thanks to our patented driveline. This remains a key competitive differentiator as it allows for far fewer parts than other independent row systems, which means lower operating costs over the life of the project. Based on the Duratrac architecture, we also launched our terrain following tracker Omnitrac late last year. We are currently quoting for deliveries late in 2023. OmniTrack allows for up to 1% north-south slope change in the torque tube, which is best in the industry. What that means practically is that we can greatly minimize or even eliminate the need to do site preparation work. This benefit is becoming increasingly important to our customers as sites move to regions of the US where flat land is not commonplace. As an added benefit, it also reduces permitting costs and is more environmentally friendly as the natural landscape does not have to be disrupted. And finally, with the introduction of the H-250 into the U.S. market, we now offer a tracker which can be optimized for smaller or more irregular shapes where a customer may not get the full benefit of Duratrac's linked row architecture. This allows us to target projects that may not have previously fit our criteria for profitability effectively increasing our available market here in the U.S., while still being able to maintain our target gross margin. Cutting across the tracker portfolio is our SmartTrack software suite. We have already deployed our backtracking and diffuse light versions of this software to multiple gigawatts of projects. But as we move into 2023, I'm happy to announce that we will expand the capabilities of this software to provide even further benefit to our customers. Here in the next few months, we will introduce SmartTrack's weather response. This upgrade will allow the tracker to connect directly to a local weather provider in order to anticipate and adjust to upcoming severe weather events, namely hail and snow. For hail stow, it will put the tracker in the best defensive position to minimize any damage to the modules. For snow stow, it will put the modules at a maximum tilt to minimize the amount of snow load that accumulates on the tracker at any given time. This will allow a site to be designed with fewer foundations and lowers the strength required in a module mounting interface. These updates further strengthen our software offering and our value proposition to our customers. With that, I will turn the call over to Nipal. Thanks, Kevin.
spk13: Please turn to slide eight. Revenues for the fourth quarter increased 83% to $402.1 million compared to $219.9 million for the prior year period, driven by higher ASP on our Duratrac product and the acquisition of STI. The $402 million in revenue reflects $269 million from the legacy array segment and $133 million from the STI segment. Gross profit increased to $80.5 million from $10.3 million in the prior year period, driven primarily by an increase in volume from the acquisition of STI as well as ASP growth in our legacy array segment. Gross margin increased to 20 percent from 4.7 percent as the legacy array segment had minimal impact from our legacy price contracts in addition to strong margin performance in our STI segment. Gross margin for the legacy array business was 18.2 percent and the STI business had gross margin of 23.8 percent in the quarter. Operating expenses increased to 64.2 million compared to 30.3 million during the same period in the prior year. The higher expense is primarily related to a $24.7 million increase in amortization expense related to the STI acquisition. The remaining increase represents the additional operating expenses from the STI business as well as higher headcount related costs to support the company's growth and innovation. Net loss attributable to common shareholders was 17.3 million compared to a net loss of 32.1 million during the same period in the prior year. And basic and diluted loss per share was 11 cents compared to basic and diluted loss per share of 24 cents during the same period in the prior year. Adjusted EBITDA increased to 51.7 million compared to 453,000 for the prior year period. Adjusted net income increased to $15 million compared to adjusted net loss of $7.8 million during the same period in the prior year and adjusted basic and diluted net income per share was $0.10 compared to adjusted diluted net loss per share of $0.06 during the same period in the prior year. Finally, our free cash flow for the period was $85.7 million versus a use of cash of 98.5 million for the same period in the prior year. Now turning to our full year results on slide nine. Revenue for the year increased 92% to 1.64 billion compared to 853.3 million for the prior year, driven by an organic increase of 414.6 million, or 49%, attributable to both an increase in the total number of megawatts shipped and an increase in ASP. Revenue growth was also driven by the acquisition of STI Norland, which contributed revenue of $369.7 million. In 2021, we shipped 9.6 gigawatts at an average selling price of 8.8 cents per watt. In 2022, we shipped 14.4 gigawatts at an average selling price of 11.3 cents per watt. Gross profit increased to $227.3 million from $82.9 million in the prior year, driven by the increase in volume both from the acquisition of STI as well as our organic growth. Gross margin increased to 13.9 percent from 9.7 percent, driven by a larger portion of higher-priced contracts and the addition of STI. Operating expenses increased to $245.4 million compared to $107.6 million in the prior year. The higher expense is primarily related to a $74.7 million increase in amortization expense related to the STI acquisition. The remaining increase represents the additional operating expenses from the STI business, as well as higher headcount related costs to support the company's growth and innovation, as well as higher professional fees related to the acquisition of STI and increase in legal and audit fees. Net loss attributable to common shareholders was 43.6 million compared to net loss of 66.1 million during the prior year, and basic and diluted loss per share was 29 cents compared to basic and diluted loss per share of 51 cents during the same period in the prior year. Adjusted EBITDA increased to 128.7 million compared to 43.2 million for the prior year due to higher gross margins. Adjusted net income increased to $57.3 million compared to $8.7 million during the prior year and adjusted basic and diluted net income per share was $0.38 compared to income per share of $0.07 during the same period in the prior year. Finally, our free cash flow for the year was $131 million versus negative $267 million for the prior year. The increase was driven by both improved profitability but also an improvement in our cash conversion cycle of 35 days, from 110 days in the fourth quarter of 2021 to 75 days in the fourth quarter of this year. Now, I'd like to go to slide 10, where I will discuss our outlook for 2023. For the full year 2023, we expect revenue to be in the range of $1.8 billion to $1.95 billion. We anticipate that the growth we will see will come from an increase in the number of megawatts shipped as we are forecasting flat ASPs for the full year 2023 when compared to the full year 2022. We expect adjusted EBITDA to be in the range of 240 million to 265 million. We expect adjusted EPS to be in the range of 75 cents to 85 cents per common share. Next, I'll break down some further elements of our forecast. From a quarterly perspective, we continue to expect the first quarter to be our lowest of the upcoming year due to normal seasonality, project pull-ins to 2022, and module availability challenges. Accordingly, we expect revenues in the first quarter to be down approximately 20% sequentially from the fourth quarter. After the first quarter, we expect our normal seasonal linearity with our biggest volumes coming in the second and third quarters before a slightly lower fourth quarter due to seasonality. From a gross margin standpoint, we expect both segments to achieve low 20s for the full year, although we could see single quarters in the high teens based on project mix and absorption of fixed costs. For adjusted SG&A, we expect between $30 to $33 million per quarter. This spend level does represent an increase from the prior year in dollars as we continue to invest in innovation and building the right business process to efficiently grow in the future. I will note, though, that even as we continue to invest, as a percent of revenue, this spend is relatively flat year over year. For interest, we expect between $10 and $11 million per quarter, and for preferred dividends, we expect between $13 to $14 million per quarter. Both of these ranges are inclusive of the non-cash portion. We expect our GAAP effective tax rate to be between 24 and 26 percent. And finally, we expect that we will again deliver over $100 million in free cash flow. As we think about our planning parameters, as Kevin mentioned, while we believe the IRA will positively impact our business and financial performance, we do not have enough information about the timing or magnitude of those impacts to include them in our 2023 guidance. Once we receive additional information, we are committed to providing an update to any potential benefits. Also, we have not assumed any negative impact from the recent bank failures. A couple of points on our assessment here. First, we do not have any direct exposure to any of the banks who have recently failed and do not currently have any deposits or investments in any regional banks. As far as indirect exposure on the more immediate cash flow side, we have not yet identified any customers who indicated that they have been impacted or that they will not be able to pay in a timely manner. On the longer-term project financing side, while we obviously cannot and will not try to predict any potential impacts of a protracted credit tightening, we will note that the vast majority of our business is large utility-scale projects backed by well-capitalized large developers who would be better suited to withstand this type of event should it occur. Now, I'll turn it back over to Kevin for some closing remarks.
spk16: Thank you, Nikhil. It has been almost one year since I started as the CEO of array, and I'm incredibly proud of what the team has accomplished during that time. No doubt there have been some challenges, but I firmly believe those challenges have made us a better company. So I want to thank the entire global array team for all of their hard work over the last year. And I look forward to all we will accomplish in the future together with that operator, please open the line for questions.
spk11: Thank you. And at this time, we will conduct our question and answer session. If you'd like to ask a question, please press star 1 on your telephone keypad. A confirmation tone will indicate that your line is in the question queue. You may press star 2 if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. Our first question comes from Brian Lee with Goldman Sachs. Please state your question.
spk10: Hey guys, good afternoon. Thanks for all the color here. I guess one question, Nipul, just starting off on the guidance, appreciate the volume versus price commentary you provided here as to what you're embedding in the outlook. But can you also give us a little bit of color as to, you know, per geography, sort of your view on volume versus price trends baked into your 23 outlook? And then also, I'm a little surprised to hear that pricing is flat versus 22. I would have thought maybe pricing has a little bit more tailwind into 23. So are you being conservative there? Could we see some potential upside emerge on the pricing side of things, whether IRA driven or not in the back half of the year? Just trying to get a sense of where your head's at around pricing.
spk13: Sure. Hey, Brian. From a pricing perspective, we look at it by geography. You know, overall, we're relatively flat, as we stated. But I would say we're a little bit higher on the STI side. And as far as pricing staying flat overall, you know, we think that there's probably a little bit of upside in that. But at this point, we can't see that.
spk02: So, therefore, we've called it as flat for the year. Okay, fair enough.
spk10: And then I know it's still sort of too early to make a call on the IRA potential impact, although you're optimistic. Can you, again, level set us as to, you know, one, where lead times are today for your U.S. shipments, and then two, what the timeframe you would expect or need a bit more clarity for some of your ongoing discussions with your supply chain and customers to materialize into some of that upside that's potentially out there?
spk13: Yeah, sure. So from a lead time perspective, we're still at around 14 weeks lead time for U.S. projects, and we are having continued discussions with our customers, and I think that as the As the language is clarifying, we feel like we'll be able to come back to the market with any potential upside that comes from that. But our lead times have stayed about the same, around 14 weeks.
spk02: All right. Fair enough. I'll take the rest offline. Thanks, guys.
spk11: Thank you. Our next question comes from Philip Shen with Roth and MKM. Please state your question.
spk06: Hey guys, thanks for taking my questions. First one's on bookings, year to date. Was wondering if you might be able to give a little bit more color on that. I know you haven't seen the full acceleration yet from the IRA given the timing of the guidance from Treasury. That said, could you share where things stand thus far? The first quarter is almost over here. Thanks.
spk13: Yeah, hey, Phil. So we continue to have solid bookings for the quarter, and we're essentially done with the first quarter here. We still see strong momentum here in the first quarter of the year, so we feel good about heading into 2023.
spk02: Great.
spk06: Thanks, people. Shifting over to the backlog, you guys talked about The backlog having high teens to low 20s margin. And your guide for 23 is low or, you know, it's 20s, greater than 20s percent. Does that suggest that the, you know, lower margin backlog could hit more in 2024 and beyond? Or do you think, yeah, help us square that up. Thanks.
spk13: Yeah, that's really a project-by-project basis when we say the low teens and high 20s in the order book. And I've mentioned the prepared remarks. There'll be certain quarters based on absorption of fixed costs where the margins may be in the high teens versus the low 20s. But overall, as we look at our guide for both segments, we see that throughout the year we're going to have, as we look at the full year, we'll have low 20s margins for both segments.
spk06: Great. We really appreciate that caller. Sorry for the noise in the background. One last one here. In terms of free cash flow, you guys had $130 million last year. You've gotten to more than $100 million this year, free cash flow. Are you planning to de-lever and not draw down on the preferreds? Specifically, why is the preferred dividend this year higher? It's $13 to $14 million a quarter versus $48 million total last year. Are you thinking of drawing down more on the preferred Series A? If yes, how much dilution might that imply? Thanks.
spk13: Great. Now, that doesn't have to do with dilution. We're not planning to draw on the preferred at this point. What that really means, if you recall, we had drawn on a bit of the preferred at the beginning of the year, so you've got the full year impact of that in there. And then we will make an assessment each quarter on kind of what the lowest cost of capital is when we decide to accrue the dividends and pay down the term loan instead based on the variable rate we have on our term loan. So that's really the reason why you see a little bit higher in the preferred for 2020, for 2023.
spk06: Okay. Thanks very much, Nebel. I'll pass it on.
spk20: Unless there's something else you guys want to share.
spk04: No, thank you.
spk11: Thank you. Our next question comes from Mark Strauss with JP Morgan. Please state your question.
spk01: Hi, good afternoon. It's Drew on for Mark. Thanks for taking our questions. I just want to touch on the new products quickly. Can you talk a little bit about what the H-250 and OmniTracker are seeing from a market receptivity standpoint, how that's translating into orders, and then what's kind of the timing outlook for future shipments?
spk14: Hi, this is Erica. I'm happy to speak to it. So from a product perspective, what we're trying to address with customers are each of their individual needs project by project. So we want to take a consultative approach, meaning depending on their site, topography, wind speeds, we have a product that addresses those needs. So Duratrack has been our flagship product for several years. And with that, we have the related Omnitrack, which is the terrain following so that it opens up a lot more land possibilities than ever before without touching the actual terrain, and it also takes into account environmental factors because you're not having to move any dirt. When we talk about the H-250, that's allowing us to have more flexibility if you have uneven boundaries in your land, and sometimes the 32 rows works, and sometimes the two-row design, the dual-row design with H-250 is a much better fit for customers, and so What we're doing is opening up the addressable market in the way that we partner with our customers. Okay, great. Thank you. And I'll just say from a customer point of view, for them, the demand is very great. When you talk about not having to – when you can shorten lead times by not moving land and leveraging our Omnitrack product – We are hearing from customers that they can't get it soon enough. So we're excited to be able to have three products at our disposal. And just one other thing that I might mention, with all of those products, our intent is to ensure that SmartTrack, our software, runs across all of our tracker lines so that our customers can have that consistency in the software delivery and productivity of their sites.
spk01: Okay. And then just to kind of follow up on that, any thoughts on when shipments might be starting? And then also, is that having any impact on why pricing might be somewhat flat and not increasing in 23?
spk16: Let me address the pricing thing here straight out. So first of all, as many of you understood, steel had been coming down quite a bit up until about the last three weeks, we were on this deflationary pathway and we were having the opposite conversations with, with analysts of, Hey, do you have to reduce price? Because steel is demonstrably lower than it was last year. Now steel's been reversing for the last three to four weeks. It's creeping back up and we're taking a kind of a conservative approach at that because it's changing so quickly. So in, again, we're protected the way we do our business. We're protected from a margin perspective on steel. But it certainly does have an impact in the overall price. And so what we see is this, as we've modeled out fairly flat, you've got a combination of things. You've got a combination of steel and aluminum being at lower rates than they were at this time of last year, offset with the more difficult type of sites that require additional engineering and additional content to be able to make those sites work effectively. So that's really what's driving our current view of flat. What we haven't baked in, as Niple said, Not only haven't we baked in any impact of the IRA in terms of the overall manufacturing credits, but we also haven't baked in any potential impact from our, you know, what we believe is the best in class domestic supply chain, right? As you would expect to go forward and depending upon the final nature of the domestic content clarification, we could see some additional pricing power yet in the back half of the year, just due to that strength we have in domestic content to customers who will have to pay a premium for a higher percentage of domestic content if they want to get that extra 10% kicker. So what we've done is just taken, again, as usual, what you've seen with our team is a conservative view of that pricing at this point. And as we get additional information, as we understand further where commodities are going, both steel and aluminum in particular, We'll come back to the market and update you on what we think our ASPs can do in the back half of the year.
spk01: That is very helpful. Thank you, Kevin.
spk11: Our next question comes from Julian Dumoulin Smith with Bank of America. Please state your question.
spk17: Hey, guys. Thanks for the time. Congratulations for everything. Hey, just coming back to domestic content, I just want to really square this away. I mean, Just what exactly, incredibly, do you need? I mean, obviously, you're doing a lot already here. In terms of clarity, specifics, and guidelines, again, I know you guys are probably in the mix in discussing these items here, but specifically as we see preliminary and final. And also, are you expecting kind of a little bit of an air pocket and a backlog as you think about that being kind of pent-up demand realized after finalized guidelines here? Is that the commentary as you think about that?
spk16: Julian, I think the demand we've seen so far is really non-IRA related. So we haven't yet seen that big pickup. So we don't really consider that we have an air pocket in our current backlog. That current backlog is all the steady demand that we've seen, the steady increases, setting aside any expected increases we'll see from IRA. And then to answer that, the first part of your question specifically is we're looking at the definition. There's two critical aspects we continue to wait on. The first is the definition of what will be considered domestic content. Again, there's multiple definitions floating around with Treasury that they have to decide upon finally and give the industry. And one would include being able to import steel from China, for example, roll it in the U.S. and call it domestic. The other says that the steel must be from melt to coat in the U.S., right? And those are two radically different positions. In the position that it would have to be pure U.S. steel, we have a decidedly strong competitive advantage because we have worked on that U.S. supply chain for many, many years, and we have deep relationships, some of which we've talked publicly about in the past, versus others in the industry who continue to bring steel in from offshore and have tube rolling mills in the U.S. and are calling that, you know, made in USA, right? So depending upon that definition will either be at worst case on par at best case, we'll have a decided competitive advantage in the market. So, so we're waiting on that. Uh, and again, that has implications in terms of market share in terms of pricing power, all of the above. And that's why we're trying to be very, very cautious until we have more clarity around that. And then the second element we continue to wait for is really further clarification. around the torque tube and structural fastener final definitions. We know what the torque tube definition is. That's pretty well defined, and we've already communicated that's between 0.15 and 0.17. So call it 15% of the tracker cost is the benefit there, and we've talked openly about that being shared at some point between our suppliers, ourselves, and to a degree to our customers as well. We feel really good about that. And it really comes down to the definition of what all gets included into structural fasteners. And as that definition becomes more clear, there's some really, if, for example, the clamps and clamping systems are covered under that definition, that would be very, very meaningful to us as an organization because we manufacture a large proportion of those in our own factory in Albuquerque, New Mexico. So, you know, these small nuances of words can have huge swings in terms of the overall ability to get at those credits and the quantum of those credits. And we just don't have enough clarity to go to the market today and say what we think they're going to be.
spk20: Got it. Excellent.
spk17: And this is on the international side, the trajectory here, you mentioned Brazil, it seems nice. The time of the deal, it seemed like you got a little bit more flattish in the STI in Brazil specifically. And how do you think about that outlook and the compounding first prospects there across the various geographies, just to quantify your, your, perhaps qualitative comments from the call a little bit more.
spk16: Yeah. So in Brazil over the last year, what shifted for us in Brazil was less of the larger utility scale programs and much more of the distributed generation programs. And that had to do with two things. Obviously we had a great competitor come into Brazil and work really well. That's one part. And the second part was the funding from the national banks in Brazil who really support a lot of the green initiatives. kind of pulled back waiting for this presidential election. Almost immediately after the presidential election, we started to see a lot of those utility scale programs go forward. And I'm quite pleased that our outlook in Brazil is very strong for this year. And it's a very good mix of both utility scale and distributed generation products. But we're very bullish on the growth that we see coming in Brazil this year.
spk20: Awesome, guys. Congrats again. See you soon. Thank you.
spk11: Thank you. Our next question comes from Mahit Mandloy with Credit Suisse. Please, your question.
spk19: Hey, good evening. Thanks for taking the questions, and congratulations on the quarter here. Two questions. First, on the OPEX, if I look at the high end of the range, somewhat implies some 7% OPEX as percentage of revenues. I'm just trying to see, like, to get to that high team CPTA margin, which you kind of talked about in the past. Could we expect to hit that 25-plus percent gross margin in 2024? Or just trying to understand, like, on the OPEX and how we think about leverage going forward here. Thanks.
spk13: Hey, Maheep. It's Nipal. So, you know, as discussed in the prepared remarks, you know, there's investments that we – we need to make here in 2023. And as margins continue to, you know, steady at the baseline low 20s and potentially increase from there as we get more clarity on the IRA in 2024, we feel like we'll get the operating expense leverage that this business can absolutely operate under. So that's where we think that we'll get back into the higher EBITDA ranges in 2024 and beyond.
spk19: Just a second question on the UFLPA here. How should we think about any upside here to this year's revenues if we see a UFLPA resolution faster here? Any color if you can give on how much time it takes to deliver the tracker once you have a purchase order in place. Any kind of good help for you? Thanks.
spk13: Yeah. Hey, Mihit. So as far as the UFLPA is concerned, where we would see that is as our order book converting faster. So if UFLPA gets cleared quicker, as modules get cleared quicker, we would see a faster conversion of our order book. So we could potentially see that order book converting, and as we add to it, potential some upside related to that.
spk19: Anyway, can kind of like help us quantify how much of that order book could be delivered in 23 if needed?
spk13: Yeah, you know, when you look at our order book and look 12 months ahead, it's about a 1.1 times the order book is what our midpoint guide is. So that conversion could happen a little bit quicker if the UFLPA gets cleared quicker.
spk04: All right. I'll take the rest of mine. Thanks.
spk03: Our next question comes from Donovan Schaefer with Northland Capital Markets.
spk11: Please state your question.
spk07: Hey, guys. Thanks for taking the questions. The first question I want to ask is, you know, about Nucor specifically since that's, you know, a supplier you guys have had for, gosh, coming up on two years now. And, you know, if you can provide any commentary on kind of, the length of that contract, if there's an expiration there with a fixed volume amount, and how much of kind of your run rate capacity or backlog does that cover? I'm just trying to get the sense, the underlying idea here is if there's a greater shift to needing to source domestically in the US, are you in a position to kind of have some of that locked in and, and, you know, box out other people or, you know, other competitors, or does that become a negotiation and there's some scrambling there trying to get it that higher, that broader idea. But if you can give any specifics on Nucor, that'd be great.
spk16: I mean, let me start, go ahead. So, so let me start Nipo with just saying that our specific contractual terms with Nucor are confidential and we're going to, we're going to honor that. confidentiality in the contract. So I won't really talk more specifically about that in the terms of the contract. All I will tell you is that Nucor is one of several strong steel suppliers and partnerships that we've put in place over the last few years. They're a very important part of our business. They're a great partner. We work very closely with them in terms of understanding where our future demand is going to be and ensuring that they're geographic footprint is aligned with what our future geographic footprint is to reduce transportation costs and things. So we feel that our working relationship is incredibly strong. They're an incredibly strong partner of ours. And again, that's part of how we feel. They're one of the steel suppliers that add to our capacity that leave us feeling that we have a very well-developed North American capacity and supply chain. and we think we have the best in the market. That's all I can really comment on that.
spk13: And Donovan, I just wanted to add that, you know, we've talked about it before by the end of Q1 that we'd have 40 gigawatts of global capacity, about 32 of that in the U.S. So Nucorp, of course, is part of that overall capacity plan.
spk16: And we're increasing that, Donovan. Every single quarter, we're increasing that. And So you imagine an exploded bill of materials, Donovan, and what we have is the overall capacity and then the percentage of that capacity that can today be turned on to qualify under domestic content as we understand it. So that's what we're focused on. So how do we get, and we've talked openly on our last call about our standard bill of material today having between 70 and 75% domestic content and us having the ability with a small premium to get up to that 90 to 95% domestic content in the bill of material. And that's what we're really focused on is the percentage of that 32 gigawatt that we can get up to that, say, you know, 95% domestic content place.
spk07: Okay. And then kind of related to this, I was actually fascinated in the opening remarks, prepared remarks, you made a comment about, you know, not having to puncture the torque tube. to clamp on modules and that giving you flexibility. I'd never connected that dot. I had always just assumed it was just the purlins, the ones that go perpendicular to the torque tube. That was the last piece. And you had to figure out where you're going to punch a hole there. But realizing you can also slide on the north-south dimension along the torque tube, that, as I understand it, that is enabled by having your unique octagonal cross-sections. and that's something you couldn't do with a circle. You could maybe do it with a square, but you couldn't do it with a circle, a circular cross-section. So I hadn't made that connection. And then I saw RePlus this year, PV Hardware's tracker, is actually doing an octagonal torque tube now. Yeah, they are. Yeah, they've kind of followed your lead there. And then FTCI, FTC Solar, their 1P design is hexagonal. So the same idea, you're coming up with some kind of a geometry that's non-circular, gives you some of the benefits of circularity with some more maybe bendiness to it versus a square, but giving you that ability to have a punctureless fixing to the torque tube. So I guess, are you seeing a trend with other competitors switching to that kind of a unique, let's think of it as like a non-standard torque tube cross-section? And then back to the same question, back to that same idea of what I just asked, are there any issues from a capacity standpoint in the US? I mean, can any role forming operation role form for an octagonal cross section or does that get at all more complicated or limited?
spk16: I think on the first part, yes, we have taken note of several of the recent launches in the industry. that look a lot closer to an array than maybe they do someone else's, right? So that's something we're keeping a watchful eye on. And certainly beyond the torque tube, other elements of their design are starting to look a lot more like arrays. So it's an interesting observation, Donovan, and something that we're keenly observing and watching and talking about internally on a regular basis. Relative to whether any tube mill, I mean, I think if you get the correct dyes in place, you could roll it, whether it be octagonal, hexagonal, any of the above. So I don't think that's really the big barrier at this point. It's more in our proprietary clamping system, our rapid clamp system that allows you to build the infrastructure irrespective of knowing which panels you're going to get. You know, we can design it for multiple panel options. And then when you're allowed to get in those panels at the end of the day, we're able to provide a different clamp Now, it's not only in the panel availability, it extends beyond that in terms of being able to have sites with mixed panels, right? So you imagine that as companies are going to be scrambling to get to their percentage of domestic content that they need on these sites, and they may have a limited availability over the next couple of years of made in U.S. panels, you imagine a scenario where customers are going to say, I'm going to start this site And the majority of panels in the site may be for solar because I have a certain level of availability of those panels. However, once I get to my 40% domestic content, using more of those at this particular site may be diminishing return versus saving those for another site. And then I can mix panels on that site. Our infrastructure will allow you to do that differently than some others. I think that's something that we're seeing in the market that's of interest.
spk11: Thank you. And our next question comes from Colin Rush with Oppenheimer. Please state your question.
spk09: Thanks so much, guys. Could you talk about how many of your customers are fully qualified with the OmniTrack solution at this point? Is it the full complement of customers, or is it a subsegment of it at this point?
spk14: We're rolling OmniTrack out this year. in select areas to make sure that it's properly installed by our partners and obviously looking at the ideal topography in which to install it. But certainly any of our customers would be welcome to use it with the correct requirements.
spk09: Okay. And then secondly, as you guys look at having increasing customer intimacy with some of these new designs, Are there other opportunities for incremental engineering improvements around footings or other areas where you can reduce labor out in the field and have it more in the factory setting in the next couple of years?
spk16: Yeah, Colin, I think part of what you're seeing in that OpEx spend next year is kind of when I came in, I made a commitment to our engineering organization and our CTO and effectively said, look, one of the best uses of my capital is is in new product development. And I looked at Erica's product management team and Terry's engineering team and made a commitment that if they bring forward really robust new product development initiatives, I will fund them, right? And that's really what you see in that OpEx increase. So we've increased our engineering spend this year, certainly over 35%, and that's part of what you see in the OpEx line. And that's really all about there's a large number of products that we think we could bring to bear to the market that are really focused on a few areas. Obviously, you've seen us disclose a lot more of what we're doing on the software side of things, and there's more to come beyond this. A lot more areas where we can ease installation and reduce installation costs. So I think this is a year of what I would say a rapid succession of product launches, of a lot of what I would say maybe small to mid-sized new product development initiatives that I think are going to be really welcomed by our customers as we go forward throughout the year.
spk09: That's super helpful. Thanks, guys.
spk16: You got it.
spk11: Our next question comes from Jeff Osborne with TD Cowan. Please state your question.
spk05: Yeah, thank you. I just had two quick ones. One is on your Spain business. I was curious what you're seeing there, and I think – A couple quarters ago, you had some challenges on the EPC side of the business there. I was curious what initiatives you put in place to improve the profitability on that front.
spk16: Yeah, so, Jeff, one of the simple things was that the challenge that our end – so remember that the challenge in the Spain business really came out as they attempted to do some construction projects in the U.S. following some of their Spanish customers that do global installations to the U.S. at the request of that customer in particular. And they just didn't have the experience of how to operate in the U.S., right? So a few things we've done. So first, we have, through our partnership of now Array and STI working together, we've assigned several Array team members to support those projects and to serve as project managers in region to help with hiring of labor, management of that labor, negotiating with the unions that we would need on some of these projects and all of that. So that's part of it. I would say the bigger benefit came as a result of the end customer not being able to have a steady supply of panels. And in our contract, that lack of steady supply of panels that created a time break in the program, Contracture allowed us to go and renegotiate. some of those labor terms or what have you that the team originally signed up for that were not the best, right? So that's part of what you're seeing here. And as we go to complete those projects, they'll just be under a better set of terms now that we had a great, you know, much greater understanding of the complexity of the projects and what's needed to bring them to fruition.
spk05: Got it. That's very helpful. And my follow-up is on a completely different topic, but on the backlog topic, developments that you've had in Q4 and Q1. Are you actually having conversations around 24 deliveries yet? Or are folks, developers, waiting for the IRA clarity to be announced to have that visibility in place?
spk16: Yeah, we're doing both. Obviously, we have customers, as we've continued to discuss, that are talking about larger programs of gigawatts of business over the next several years. Those are conversations that are ongoing. I think some of those programs are coming through and others are just waiting for that clarity as they determine, you know, to what degree they need to put how many eggs in a raised basket, depending upon, for example, the domestic content provisions.
spk05: Are they putting deposits on those multi-year orders or no?
spk16: The deposits will stay in the same format as we have today, meaning that there will be some minimum requirements annually, for example, on these contracts, almost like a take or pay on a minimum basis. And then the deposits come as we sign up those individual projects that pull down from that overall volume commitment.
spk13: Thank you. Just a little clarification, too, is that our order book is, would only consist of named projects. So what Kevin's talking about are things that we're getting into, but they're not in our order book at this point.
spk16: Yeah, absolutely. And that's a clear distinction we want to make sure that everyone on this call understands is that our order book, when we say order book, does not include volume commitments that don't have very specific either awarded or contracted named projects.
spk05: If I'm hearing you right, you have MSA agreements with developers that might go out three or five years, but name projects might only go out 18 to 24 months. Is that the right way to think about it?
spk13: Well, they're projects, so size of the projects, right, will depend on how long they go out, right? But that is the way to think about it.
spk16: I guess the clarity we want to make is that our backlog – So when we compare our backlog to others in the industry that have recently discussed their backlog, they've included these long-term megawatt commitments that they may have with a customer. We have not included that in our backlog. So our backlog is more easily translated to a future revenue stream that's more predictable than maybe theirs. If we were to include those, we would have a much higher number that we'd be talking about. but we like that clarity and line of sight of our backlog and conversion to a particular revenue within a particular set period of time.
spk11: Got it. Thank you.
spk05: Appreciate it.
spk11: Our next question comes from Joseph Osha with Guggenheim Partners. Please state your question.
spk18: All right. I made it. Thank you and hello, everyone.
spk16: Hi, Joseph.
spk18: Hi. I wanted to return to some of the comments that you were making about domestic content and how that reflects its pricing with your customers. I want to understand the logistics of this. If you have an order in hand and you're unclear yet about whether your customers are going to be able to claim the domestic content credit or not, is there something written into the the contract that allows you to reopen the conversation depending on the outcome of, of IRS guidance or what? I just want to make sure I understand exactly how this, how this works.
spk16: So to be clear, the orders that we have in our backlog have no, I would say largely have no specific domestic content requirement, right? Which means we could satisfy them with our, our, for lack of a better word, standard bill of material today at 70 to 75%. Or we can add more domestic content. What, will come, what I foresee is in the future, as the domestic content requirements become clearer and those sites now can start doing the formulaic math of what they need to get to their 40% and then the increasing 45 up to the 55% in a few years, when they have that clear to be able to do their math, they'll come back to us and say, hey, Ray, on this 125 megawatt project, we need as much domestic content as you can give us. what's the premium to go from that 75% up to that 95%, right? And, again, that would open a change order likely in a contract. But today we're not specifying any of that enhanced domestic content. Put it that way.
spk18: Okay. All right. So, again, so basically the way it's written now, it leaves you the option basically to say, hey, this is a change order if somebody comes back and hits you with a specific request. That's correct. Okay. All right, I got it. Thanks very much. That was my only question. You're welcome.
spk03: Our next question comes from Jordan Levy with Truist Securities. Please say your question. Jordan Levy, your line is open. Please go ahead.
spk11: Okay, we'll move on to the next question. Our next question comes from Vikram Bagri with Citi. Please state your question.
spk12: Hey, guys. I wanted to follow up on the uncertainty caused by the IRA and unavailability of modules. Is there a way to quantify what kind of impact it will have? One, on the backlog, it seems like there is there are orders on the sideline which are not included in the backlog, which will quickly materialize into backlog once the clarity is provided, one. And then two, how much of the decline, the sequential decline in one first quarter that you talked about, 20%, is caused by seasonality versus lack of clarity on IRA versus module availability? And have you seen any any slippage in timing of any of the projects because of lack of clarity on the IRA front and or the module availability issues.
spk13: Hey, Vikram. This is Nabil. I'll start. So on your second question first, of the first quarter, 20% down sequentially, as mentioned in the prepared remarks, part of that is just normal seasonality, Q1, and we mostly have a North American business. So that's typically, you know, depending on weather conditions at sites, we typically have lower deliveries in that first quarter. In addition, we've been stating all along the last couple of quarters here that the UFLPA and the module availability has slowed down some of the conversion, the order conversion, and we expected that in Q1. So a combination of those two items is the reason why we're down sequentially 20%. As far as quantifying the impact of the IRA, I just At this point, we don't feel comfortable because there's a lot of unknowns, right, in that. And as Kevin said earlier, once we get that clarity, you know, we've made the commitment to have that transparency and come out to the market on how that impacts. The bottom line is it should be upside once we get clarity, but we just don't have that at this point.
spk12: Understood. And then as a follow-up, what is causing or driving the cautious outlook in Europe? Permitting clearly is tough, and it seems like EU is taking steps to address that. Is it entirely related to difficult permitting that you're expecting to be addressed, or is it something else related to Critical Materials Act or Net Zero Act, which is causing some uncertainty in the market? I was trying to understand what's causing the cautious outlook in Europe.
spk16: Well, it's all relative, first of all.
spk04: Go ahead, Kevin.
spk16: No, that was the only – go ahead, Nico. The only point I wanted to make is it's cautious on a relative basis to the hyper growth we'll expect in the U.S. in the near term, right?
spk13: That's right. And what I would say is in talking to our business, it's primarily delays related to permitting that's causing that cautiousness in Europe for us.
spk12: Thank you. That's all I had.
spk11: Our next question comes from Jordan Levy with Truist Securities. Please state your question.
spk08: Afternoon, all. Can you hear me okay? Yeah. Got you.
spk13: Yes.
spk08: Great. Thanks so much for all the detail. Just a quick one from me. I wanted to see if we could just get a little more of your thoughts on the Australia market. You mentioned the in-country content you were able to secure there as a key differentiator, certainly key international market. So, Just wanted to get your thoughts on how you're continuing to think about Australia and your mix and the opportunity presented through being able to get that in-country content.
spk16: Yeah, I mean, so clearly what you're seeing is a little bit of protectionism crop up all over the world in, you know, some of it in response to the US IRA, right? But certainly that increasing domestic content requirements are cropping up in other countries around the world as well. In Australia, the team brought that forward, worked very closely with our supply chain organization for a period of months as we quickly went out and looked at all the different component vendors we can utilize, did a lot of rapid testing of their materials, evaluation of the financial strength of each of those partners we would choose, and then we feel we've locked up kind of the best of each of the players into a program to work with Array very closely, right? I think we feel that we've done our work in Australia. We're going to be in a great position as evidenced by the winning of the first award. And I think there'll be several others that as we go throughout this year and next year that will win as directly related to our ability to supply that domestic content.
spk08: Great. Thanks so much for squeezing me in. Absolutely.
spk11: And thanks. We have a next question from Mahit Mandloy with Credit Suisse. Please go ahead.
spk19: Hey, sorry, just one quick housekeeping. For the 10K, I haven't seen it out yet. Just wondering on the timing for it. Thanks.
spk13: Yeah, hey, Maheep. Yeah, we are working to get that filed here as quickly as possible. Likely, you know, we like to file the 10K soon after our earnings call, so we should see it here today or tomorrow and file to the SEC.
spk19: Yes, all right.
spk04: I appreciate that. Thanks.
spk11: Thank you. There are no further questions at this time. I'll hand it back to management for closing remarks.
spk20: Thank you, Diego.
spk16: Just in closing, I just once again would like to thank the array of associates all around the world who continue to demonstrate a passion for execution and a passion for the mission that we're on for our environment. So thank you again, and thank you all for attending.
spk11: Thank you. This concludes today's conference. All parties may disconnect. Have a great day.
Disclaimer