This conference call transcript was computer generated and almost certianly contains errors. This transcript is provided for information purposes only.EarningsCall, LLC makes no representation about the accuracy of the aforementioned transcript, and you are cautioned not to place undue reliance on the information provided by the transcript.
Operator
Good morning, ladies and gentlemen, and welcome to the Ideal Power first quarter 2024 results call. At this time, all participants are in a listen-only mode. At the end of management's remarks, there will be a question and answer session. Investors can submit their questions anytime within the meeting webcast by typing them into the Q&A button on the left side of your viewing screen. Analysts who publish research may ask questions on the phone lines. For analysts to ask questions on the phone lines, please press star 1 on your phone handset to join the queue. As a reminder, this event is being recorded. I would now like to turn the conference over to Jeff Christensen. Please go ahead.
Jeff Christensen
Thank you, Operator, and good morning, everyone. Thank you for joining Ideal Power's first quarter 2024 conference call. With me on the call are Dan Bernard, President and Chief Executive Officer, and Tim Burns, Chief Financial Officer. Ideal Power's first quarter 2024 financial results press release is available on the company's website at idealpower.com. Before we begin, I'd like to remind everyone that statements made on the call and webcast, including those regarding future results and company prospects, are forward-looking and may be subject to a number of risks and uncertainties that could cause actual results to differ materially from those described in the call. Please refer to the company's SEC filings for a list of the associated risks And we would also refer you to the company's website for supporting company information. Now I'd like to turn the call over to Ideal Power's President and CEO, Dan Renard. Dan?
Dan Renard
Thank you, Jeff, and everyone for joining us on the first quarter 2024 conference call this morning. I'm eager to share some recent updates on the business since the start of the first year and review our priorities for 2024. Then I'll turn things over to Tim Burns to review our financials. We'll be pleased to answer your questions after our remarks. This was an exciting quarter for us as we made significant progress in our customer engagements and commercialization efforts as evidenced by the conversion of customers in our test and evaluation program moving to commercial orders, shipping our first commercial products, the addition of our first distributor and their subsequent customer orders, successfully completing the current program phase with Stellantis, and the addition of new large companies to our test and evaluation program. We'll take a look at each of these activities and some additional progress against our objectives for the year. But for those new to ideal power, I want to briefly address the markets we serve and the opportunity for our technology. Our technology, B-TRAN, is a low-loss bidirectional power semiconductor device that has wide applicability in high-power applications such as solid-state circuit breakers and circuit protection, renewable energy, energy storage, electric vehicles and EV charging, industrial motor drives, UPS systems for data centers, and power converters for a variety of industrial utility and military applications. Based on a recent study by Mordor Intelligence in their Global Power Electronics Market Report and company estimates, the D-Trans Serviceable Addressable Market, or SAM, is predicted to more than double over the next five years. With a projected 16% compound annual growth rate, The total SAM for BTRAN is forecasted to grow from 3.6 billion in 2023 to 7.6 billion in 2028. Today, this market is currently served largely by conventional power semiconductor devices called IGBTs, which were invented decades ago and are largely believed to have reached the limit of their performance. The primary drivers for all of these applications I just mentioned are the need to reduce costs and improve their efficiency or the useful energy available for the end-user customers. That, in essence, is what B-TRAM is specifically designed to do. For electric vehicles, it means lower vehicle first cost and longer range. For EV charging, it means lower cost chargers and faster charging. For data centers, it means lower operating costs. For renewable energy and energy storage, it needs more useful kilowatt hours for the end customer. Last year, we completed the highest technical risk of our technology development, which was making high-performance, high-quality devices in a commercial wafer fab with good yields. Our focus for this year and going forward is commercialization of our technology and our products. We're thrilled about our continued momentum and advancement of customer engagements and meaningful steps on our B-Trend commercialization roadmap as evidenced by these recent announcements. First, the fulfillment of initial customer orders for our Simcool Power Module. The Simcool Power Module delivers very low conduction losses for circuit breaker and circuit protection applications in industrial, utility, electric vehicle, and military markets, and is expected to be the earliest source of our sales ramp. Second, we added our first distributor, Richardson Electronics, for discrete VTRAN devices and Simcool products. Richardson Electronics has already placed multiple orders with ideal power from large global customers interested in our technology for solid-state circuit breaker products for industrial markets. Third, we successfully completed phase two of our development program with Stellantis, a top-ten global automaker, well ahead of schedule. Fourth, we added a global leader in circuit protection, industrial fuses, and power conversion technology with over a billion dollars in annual sales to the roster of the B-TRAN test and evaluation programs. Fifth, we're nearing completion of what we expect to be a successful qualification run with our second high-volume wafer fabrication partner. And sixth, we released BTRAN and Simcool videos and application notes for prospective customers' technical audience, resulting in the addition of new opportunities to our sales funnel as they help engineering teams at our target customers better understand our new technology. The videos demonstrate the testing of BTRAN devices and Simcool power modules and the compelling advantage BTRAN offers. Before I discuss some of these activities, I want to take a step back and highlight what customers are looking for in the advantages of our approach. Due to the increasing electrification of our society, there's a growing need for better circuit protection for industrial facilities and the electric utility transmission and distribution system as more renewable energy, energy storage, and vehicle charging installations are added to our grid. The current electric utility grid was never designed to safely accommodate the widespread adoption of intermittent generation such as solar or wind energy. Electric vehicles also need enhanced circuit protection to safely control the use of lithium-based batteries and extend their range. In addition, the huge investment in vehicle charging stations needed to support the adoption of electric vehicles will require significant investment in the utility and industrial infrastructure to safely allow these systems to be grid connected. Government policy is expected to help accelerate this much-needed infrastructure update and improve the overall reliability of the grid. On Monday, the U.S. Federal Energy Regulatory Commission approved its first major electric transmission policy update in over a decade to address this growing need to update our grid infrastructure. The new rule aims to speed up new interregional transmission lines to move clean energy to meet the growing demand created by the adoption of EVs and EV chargers, data centers, and artificial intelligence. These trends drive the need for solid-state circuit breakers and circuit protection, which can act orders of magnitude faster than conventional mechanical breakers to safely eliminate arcing and the potential for fires and reduce the maintenance arcing imposes on traditional breakers. To make solid-state circuit protection viable requires a very low-loss, high-power semiconductor, which is what B-TRAN provides. The desire of large companies to bring these solutions to market is what is driving our initial customer engagements and orders and is expected to be the first source of commercial revenue for us as it's reflected in our initial Simcoe orders and the growing list of large companies evaluating our products. A key advantage of our Simcoe product is that it not only provides ultra-low conduction losses, It also provides inherent bidirectionality and is designed so the customer can parallel as many units as they need to get to any rating they desire for their circuit protection products. This scalability gives them significant flexibility in how they size products like circuit breakers, which can range in size from hundreds of volts to tens of thousands of volts, while simultaneously lowering component count, energy losses, and OEM system costs. Our progress in this market is evidenced by the growing number of large companies in our sales funnel focused on solid-state circuit breaker and circuit protection, and by the advancement of companies in our test and evaluation program now placing commercial orders for our products. We recently received an order for Simcoe power modules and drivers from one of the Forbes Global 500 leaders in diverse power management markets in our B-TRAN test and evaluation program. This global power management market leader is evaluating Simcool against IGBT modules for use in solid-state circuit breaker applications. The order for Simcool power modules follows the customer's testing of discrete B-TRAN devices as part of our test and evaluation program. In response to this customer's request, Ideal Power provided high-volume multi-year quotes for Simcool power modules as part of their product planning activities. This customer is also evaluating our technology for its other power conversion applications. We expect to convert additional program participants into initial and follow-on orders over the course of this year as customers complete their technology evaluations and begin working on product designs incorporating Simcool. Also, during the first quarter, we received an order for B-TRAN devices and a circuit breaker evaluation board from a global leader in power semiconductor and power electronic solutions in connection with its launch of a multi-year DC power distribution system program. This global leader presents multiple opportunities for us as it addresses several of our target industrial markets, including solid-state circuit breakers, industrial and grid infrastructure, and renewable energy. We also added a global leader in circuit protection, industrial fuses, and power conversion technology, with over a billion dollars in annual sales to the roster of the B-TRAN Test and Evaluation Program. This program participant is expected to test and evaluate B-TRAN power semiconductors for circuit protection in industrial markets, including industrial fuses, renewable energy and energy storage, power conversion, rail transportation, and EV power management. As we said previously, Given the evaluation and OEM product design cycles of most industrial companies, volume and revenue will be modest in 2024 as our customers go through their product planning and product design cycles, as these customers work towards releasing their products that incorporate our B-Tran technology. As part of our effort to reach additional customers and leverage the semiconductor infrastructure, we added our first distributor, Richardson Electronics, for discrete B-Tran devices and simple power modules. They have strong technical sales capability, expertise in creating demand and securing sales for new technologies, robust customer support, and global reach. Our relationship with them allows us to leverage their extensive customer base and brings Richardson Electronics compelling products to add to their portfolio for their customers needing high and medium voltage power semiconductors. Riches and Electronics has already placed multiple orders with Ideal Power from large global customers interested in our technology for solid state circuit breaker products for industrial markets, including an order from a large global company not previously in Ideal Power's sales funnel. We already see customers, particularly in the circuit breaker and circuit protection markets, starting to be served by Richardson Electronics. We expect this trend to continue as we convert program participants initially into distribution customers and ultimately to direct customers for larger OEMs. We're also finalizing an agreement with a second distributor with particular strength in Asia. Our focus is engaging distributors like Richardson Electronics with a strong technical sales team with expertise in securing sales for new technologies and global reach. We'll add more reps and distributors over time to have comprehensive channel coverage. Turning to the automotive market, automakers are looking for solutions to help them both lower cost and extend the range of electric vehicles to drive mass adoption, which is what B-TRAN provides for hybrid and electric vehicles. With current solutions such as IGBTs and silicon carbide MOSFETs, there's a tradeoff between cost and range. Our technology allows automakers to improve range at the cost of silicon rather than incurring the high cost of silicon carbide devices. Building upon work done by Toyota on the impact of improving semiconductor performance, eTRAN has the potential to improve the range of electric vehicles by 7 to 10 percent compared to conventional IGBTs while offering significant cost savings compared to silicon carbide devices. These are the advantages that continue to be the focus for Stellantis and our funded program for their next generation EV platform. Their focus is to use a custom V-Tran power module for use in EV drivetrain inverters and also for battery circuit protection. Their stated goal for the program is to have a custom module production ready by 2025. We expect modest revenue from Stellantis this year as we continue to execute against program milestones and deliverables. During the quarter, we successfully completed all the Phase II deliverables of the program several months ahead of schedule. Phase II deliverables completed this year included a multi-wafer run, delivery of tested and packaged devices and drivers to both the program's packaging company and the organization building the initial drivetrain inverter. We collaborated closely with Stellantis and the program partners to supply BTRAN devices for integration into the custom power module and inverter designs. The device testing results by the Stellantis program validated the expected efficiency improvements anticipated from the use of BTRAN in the drivetrain. The successful completion of phase two is customer validation of BTRAN and its potential impact on improving EV range and cost. The next phase of the program now incorporates the production side of their organization and internally to Stellantis is already underway. Recently, Stellantis issued a solicitation to a large number of Tier 1 suppliers to submit their proposals for a pre-production EV inverter that includes B-Trend. Since we're already working with some of the Tier 1 suppliers, they're well-positioned to provide a competitive proposal, but it also introduces ideal power to several additional Tier 1 suppliers that are not in our current list of engagements. These companies are the dominant suppliers to many of the global automotive OEMs, so it provides a great opportunity for us to engage other automakers as we're not constrained in any way under the terms of our agreement with Stellantis. The proposals from Tier 1 suppliers are due in a few weeks, at which point Stellantis will down select to a short list of Tier 1 suppliers that will be part of the engagement and scope of our Phase 3 activities. As a parallel activity, we're preparing to begin our automotive qualification testing based on the test plan approved by Stellantis as part of phase two. The supplier has been selected, and the runs we intend to use for the initial testing are already in progress. While the automotive qualification process is rather lengthy, taking many months to complete, we've been working closely with a third-party firm selected for the testing to gather information on the most common failure mechanisms from previous automotive qualified products to ensure the packaging design and wafer fabrication activities leverage the lessons learned from other semiconductor qualifications. The successful completion of the automotive qualification process will enable B-TRAN to be the core of the powertrain inverter for the automaker's next-generation EV platform. It also strengthens the commercial readiness of our products and technology for industrial customers, as the standards for the automotive industry are the most demanding of any power semiconductor application. An advantage to our approach for the foreseeable future is that the wafers and resulting dyes are all exactly the same for any application, whether it's going into a circuit breaker, an electric vehicle, energy storage system, or solar installation. We can ramp up production cost-effectively because we don't have to forecast wafer demand and dye design mix based on the application. They're all the same for us. Another advantage to our approach is our ability to leverage the huge investment already made in silicon wafer fabrication and packaging for power semiconductor devices. Our asset-led business model gives us the ability to continue focusing on technology improvement while quickly incorporating customer feedback into our product roadmap. Let's look quickly at what we were doing to ensure the supply chain is able to support our longer-term sales and production ramp and manage costs. Our second high-volume wafer fabrication partner is nearing completion of a qualification run. This wafer fab in Europe will support future revenue growth and add dual sourcing for wafer fabrication. We're very pleased with the capability of the team and their expertise. As a wafer fab that already makes high-power semiconductors, they bring a high level of fabrication expertise and are eager to play a role in bringing a novel, high-performance product to market that's focused on the market segments driving long-term growth in the power semiconductor industry. We're leveraging the proven process flow being used at our existing wafer fab in Asia, and their progress has been excellent. The run at this European fab is nearing completion, and we're confident it'll result in working devices on the first run. We expect to complete the qualification of this fab in the coming weeks. At our existing fab, we've been pleasantly surprised by their rapid progress. Our initial qualification run produced excellent devices with a yield much higher than expected on an initial qualification run. Our expectation was that through most of next year, we'd be working closely with them to drive wafer yield up to the commercial levels needed for mature technology. Our most recent few runs are already achieving the yields that we were targeting for next year, so we're excited to see this level of performance as it enhances our capacity and lowers our device cost. Looking briefly at our intellectual property, we're not aware of any competing inherently bidirectional technologies that are using anything similar to our technology. In addition, we treat the proven process flow we use to make our devices as a trade secret and work under strict confidentiality with our wafer fabrication partners. Looking at our expanding B-TRAN patent estate, we currently have 86 issued B-TRAN patents with 39 of those issued outside of the United States. Our current geographic coverage for our patents includes North America, China, Japan, South Korea, India, and Europe, with pending coverage in Taiwan, all representing our high-priority patent coverage geographies. As part of our product development and introductions, we've expanded our patent efforts to include what we believe to be high-value patents for our driver design, controls, and packaging designs, as both are unique to the bidirectional nature of our technology. As a result of our continued innovation, our list of pending B-TRAN patents is now at 41. We've seen significant commercial progress this quarter and remain very much on track to complete our stated 2024 milestones for our commercialization roadmap. We started fulfilling customer orders for Simcool. We completed phase two of our program with Stellantis ahead of schedule. We added a global distributor that's already securing orders for us. We advanced companies from our test and evaluation program to placing commercial orders. And we expanded the roster of test and evaluation program participants while growing our sales funnel. Strong momentum continues, and we remain on track to achieve our 2024 milestones, which include converting large OEMs in our test and evaluation programs to design wins and or custom development agreements, selling Simcoe power modules to existing and additional target industrial customers, adding one or more additional distributors for our Simcoe products, securing phase three of and continuing the strong execution on our development program with Stellantis, completing the qualification of a second high-volume production fab, beginning a third-party automotive qualification testing, and capturing initial orders for our SimCool IQ Intelligent Power Module. We look forward to several announcements in the coming months as we complete the key objectives we've outlined for the year. We'll maintain our relentless focus on executing our BTRAN commercialization roadmap and growing customer engagements. I'd like to hand the call over to our Chief Financial Officer, Tim Burns, to review our financials.
Tim Burns
Tim? Thank you, Dan. I will review the first quarter 2024 financial results. We recorded $79,000 in commercial revenue for the first quarter. Looking at the balance of 2024, we expect modest commercial revenue from both product sales and development agreements. Operating expenses were $2.5 million in the first quarter of 2024, down from $2.6 million in the first quarter of 2023. We continue to expect some quarter-to-quarter variability in operating expenses, particularly our research and development spending, due to the timing of semiconductor fabrication runs, product development, other research and development activities, and hiring. The timing of equity grants and related stock-based compensation expense may also cause variability in our quarterly operating expenses. We expect general and administrative expenses to be up modestly in the second quarter of 2024, due partly to the timing of our annual shareholder meeting and associated costs. Sales and marketing spending is expected to continue to increase modestly in coming quarters due to hiring and costs associated with our commercialization efforts. Net loss in the first quarter of 2024 was $2.5 million flat compared to the first quarter of 2023. First quarter 2024 cash burn, which excludes the net proceeds from our public offering, was $1.9 million, below our guidance of $2.3 to $2.4 million due to the timing of spending and related payments. We continue to manage expenses prudently and aggressively. We expect second quarter 2024 cash burn of approximately $2.2 to $2.4 million, partly due to timing reversals from the first quarter, In the full year 2024 cash burn of $8 to $8.5 million, net of an expected $1 million benefit from proceeds from expiring heavily in the money warrants. Cash and cash equivalents totaled $20.2 million at March 31st, 2024. We have no debt in a clean capital structure. Despite a difficult capital market for small and micro-cap companies, we completed a public offering which added multiple years of cash to our balance sheet. A strong balance sheet is critical to our commercialization efforts as the large companies we are engaged with need to know we have the capital support ramping our business. The public offering closed in late March with net proceeds of $13.7 million. Subsequently, the over allotment was exercised by the underwriters in April bringing the total net proceeds to $15.7 million. It was a clean transaction, common stock only. Our largest existing institutional holders led the deal, and we added exclusively high-quality, long-only new investors. The book was more than two times oversubscribed. With the public offering completed, our sole focus is on commercialization. At the end of March, we had 7,381,378 shares outstanding, 887,160 pre-funded warrants outstanding, 844,175 options and stock units outstanding, and 786,420 warrants outstanding. 444,180 of these warrants outstanding are set to expire in November of this year if not exercised beforehand. At March 31st, 2024, our fully diluted share count was 9,899,133 shares. In April, 300,000 shares outstanding were added to this total due to the closing of the over allotment option from our public offering. At this time, I'd like to open up the call for questions. Operator?
Operator
Thank you very much. we will now be conducting a question and answer session. Investors can submit their questions within the meeting by typing them into the Q&A button on the left side of your viewing screen. Analysts who publish research may also ask questions on the phone lines. For analysts to ask questions on the phone line, please press star 1 on your phone handset to join the queue. A confirmation term will indicate your line is in the question queue. You may press star 2 if you would like to remove your question from the queue. For any participants using speaker equipment, it may be necessary to pick up your handset before you press the keys. Please wait a moment whilst we poll for questions. Thank you. Your first question is coming from Brian Dobson of Chardon. Brian Dobson, your line is live.
Brian Dobson
Good morning. Thanks very much for taking my questions. Sure. So I guess first on Stellanus, that's some exciting news about phase two being completed. I guess as you've given us some really good color on that already, how do you think progressing through this process with a, call it tier one OEM like Stellanus has helped you in your approach to perhaps other OEMs? Do you find that there's a lot of synergy there in terms of improving your product?
Dan Renard
I tell you, great question. You know, one of the things that we are happy about is that we're not really constrained in what we're doing under the Solanthus program. So we are literally taking test results that we've generated for Solanthus and going to other Tier 1s and other automotive OEMs. So, you know, the things that they're focused on, the kind of data they want, how they want testing done, we basically get a lot of repeatability out of it. And the fact that when we go to these other OEMs and other Tier 1s, when it's clear that we understand how the testing needs to be done for the automobile sector, it gives them confidence that we actually really got our arms around what the requirements are. So it's been really beneficial that we don't have limitations as a result of what we're doing with Stellantis.
Brian Dobson
Yeah, very good. And so the order activity around Simcool is interesting. When do you think you might have more color in terms of feedback from those modules? Have you received any early feedback? from those two S&P 500 companies?
Tim Burns
So, we're actively engaged with both of them. Obviously, one has already ordered Simcool product from us. I would say it's a little bit early to get detailed feedback. I mean, we're in discussions with one of them in particular for potentially a development program for a product line that they're looking to potentially roll out for solid-state circuit breakers. So, I think it's something where we're just saying actively engage with these companies, and once they kind of graduate, so to speak, from the test and evaluation program, there's still going to be initially low-volume orders that, you know, follow-on orders will increase in size over time, but it's not a process where you, quote-unquote, graduate from the test and evaluation program, and the next day is a design win, right? It's an ongoing process, and we think the The process, really, it's about a 12-month process. So we would expect to convert some of these companies here potentially later this year and design wins for products that would be, you know, ready to roll out either very late this year or into early next year.
Brian Dobson
Yeah, very good. You know, you mentioned a lot of areas for growth on the call, but if you had to narrow it down to, say, one or two that you're most excited about for 2025, 2026, What would those be? Where are you looking to devote the lion's share of, call it, management's time and efforts?
Dan Renard
Yeah, I think it's really things that are around circuit protection, for one, because it's a shorter cycle. But in the timeframe you're talking about, we're also going to be pretty well into the programs with certainly Stellanthus and hopefully others. So we've got sort of a short-term opportunity, a longer-term opportunity that's even bigger. So we're kind of trying to leverage what we're doing for both of those and be responsive to both because they both are just driven by really fundamental changes going on in the automobile industry and the need to upgrade our electric infrastructure.
Brian Dobson
Excellent. Thanks very much.
Operator
Thank you. Thank you very much. Just as a reminder there, for anyone that wishes to ask a question on the phone lines, you may press star 1 on your phone handset to join the queue. That's analysts for questions on the phone lines. If you wish to ask a question in the meeting webcast, you can type them into the Q&A button on the left side of your screen and hit submit. Thank you. Okay, I will now turn this call back to Jeff Christensen to read any questions that have been submitted through the webcast. Thank you.
Jeff Christensen
Thanks, Operator. And our first question is, have all the companies involved in our test and evaluation program been announced, or are there some that you just have not announced?
Tim Burns
So, yeah, there are some that we haven't announced. I mean, we focus our announcements really on what we think are the largest opportunities. So there's companies that are not been announced that are in that program. I would say also there's companies that may be very large companies that just won't participate in the test and evaluation program. They'll go straight to buying our SimCool product because they really want to get a head start in evaluating that product from their solid state circuit breaker and circuit protection product. So it will be a mix, but, yeah, we'll – I continue to announce the very large companies that have joined the program, but in general, no, we will not announce every entrant into that attested evaluation program.
Jeff Christensen
Okay, thank you. Is the arrangement with Richardson exclusive in any way, and why was Richardson selected?
Dan Renard
Yeah, it is not exclusive. There was a little bit of confusion when Richardson had their earnings call. They're so excited about what we're doing together. I think the speaker kind of got a little carried away. And we had to go back to them and let them know that the individual unfortunately misspoke. Our relationship with them is not exclusive. We really selected them because while they're not the biggest distributor out there, they really have unique expertise in technical sales as it relates to new technology and new products. They don't really focus on the commodity parts that you find with some of the other really, really large distributors where it's just turning parts out at the lowest cost. They really have the technical expertise there. to actually support their customers as new technology comes to market. And I think they're just kind of a great fit for what we need. But as I mentioned in my prepared comments, we're going to be adding some others because we do realize that, you know, while they've got a great customer base, there are customers they don't reach. So we want to make sure that we've got really good channel coverage globally in terms of the opportunities that BTRAN presents for us.
Jeff Christensen
Thank you. And I just want to do, Nate, we've got several questions in the queue here on the webcast from the Ask a Question button. So look forward to your questions there. You can submit it into that Ask a Question button. Our next question is, what is the product that Ideal Power is Circuit Breaker? What Circuit Breaker product do we replace with our products?
Dan Renard
Yeah, I mean, well, it's a circuit breaker that will be designed by others, companies that make industrial equipment and utility equipment, companies like Siemens, Eaton, ABB. What it's replacing is the traditional electromechanical breaker. If you look at any utility infrastructure, you go to a substation, they all use these electromechanical breakers that while they have low conduction losses, they act very slowly. A semiconductor-based device can literally act more than 100 times faster, which means you don't have arcing. Arcing causes fires. Arcing wears the contacts in the breaker. So the need to actually have faster-acting breakers as we have more and more distributed energy put into the system and as we have more distributed loads like EV charging, requires better, faster-acting breakers. And that's really the opportunity that it's presenting for us. Solid-state circuit breakers have actually been around for a while, but the problem has been those that are IGBT-based have just had too high a conduction loss to make them a practical solution. So we actually function as an enabling technology for the circuit breaker replacements.
Jeff Christensen
Thank you. Can you provide any updates on any of the other companies in the test and evaluation program beyond what you mentioned?
Tim Burns
We're actively engaged with all of them. The one that's probably most notable is the other top 10 automakers that's in that program. They became, I would say, particularly actively engaged after we were able to name Stellantis back in December. We continue discussions with them on a regular basis. We're talking about actually multiple different ideas right now for potential custom development program with them. So I would say that's probably the biggest update. I mean, Dan, in his prepared remarks, went through us converting some of the companies, including a Forbes Global 500 Power Management Market Leader program. into actually starting to buy products and place orders with us. So I think that's kind of the expectation is that as companies get through their initial valuation, they'll start to actually place orders for relatively small small quantities so that they can continue their evaluation, particularly if they're looking at the SimCool for the solid-state circuit breaker application. The actual test and evaluation program is designed around the discrete VTRAN device, so a single die, not this multi-die SimCool module that we released as our first commercial product. So we think that's going to kind of be the evolution, really, is test and evaluation programs will transition to ordering and obviously follow-on orders, and ultimately design wins or custom development agreements.
Jeff Christensen
Thank you. And for the audience, if you have a question, go ahead and just submit one at a time. I want to make sure we got your questions in. You don't feel like you're going to need to group them all together to ask. Our next question is, can you provide us with any other information on Tier 1s and OEMs besides Stellantis in automotive?
Dan Renard
We can't name any of them. There are a couple that we actually meet with on a regular basis. And now, I guess it's actually starting today, those that were in the solicitation from Stellantis, we're now engaging with a broader group of them. So the Tier 1s, you know, ultimately know that they're going to be ones providing these systems. So, you know, those that are the big players that you would expect to be providing the space are already engaged with us to understand the technology, to understand the benefits that it can bring. and to understand how the automakers that we're working with are thinking about using the technology. My hope is that, particularly as we get through this next phase with Stellantis, we'll be able to start naming some of these tier ones. Because if you know the automobile industry, you'll recognize their names.
Jeff Christensen
Great. Thank you. And that's all the time we have questions for. And Dan, do you have any closing remarks?
Dan Renard
I just want to thank everybody for joining our call. We made great progress on our path to commercialize our technology, and our talent and team is on track for a very successful 2024. We look forward to continuing commercial announcements before our next update call. So, operator, you may end the call.
Operator
Thank you very much. This concludes today's conference. All parties may disconnect, and have a great day.
Disclaimer