Impact Coatings AB (publ)

Hello and welcome to today's Finwire broadcast presentation with Impact Quotings. After the presentation, there will be a question and answer session. So if you have any questions, you can submit them using the form on the right. In case you are following the report at the phone, you can push star 9 on your telephone keypad to raise your hand and star 6 to lower the hand. With that said, I'll hand the floor to you, CEOs Jonas Nilsson and CFO Lena Ober. Please go ahead.

Hi everyone, I am Jonas Ilson and welcome to this presentation of the fourth quarter and year end financial report. Here is the agenda for today's webcast. We will start with a brief presentation of the company, mainly for our new shareholders. Then we will talk about our new strategy and especially SOFC, solid oxide fuel cells. Then we will go through the highlights from Q4 and some full year highlights. Our CFO, Leanne Åberg, will take us through the financials. Then summary and outlook and a Q&A session at the end. So Impact Coatings in brief. Impact Coatings is an advanced material science company with world leading solutions in the areas we are active. We provide solutions consisting of coatings and machines for coatings. We have a flexible business model with both machine sales and coating as a service. We are active in several markets but focus on energy where our machines provides a perfect fit. Today, we are the market leader for PEM fuel cell coatings in China. According to our calculations based on customer data, about half of the volume of stainless steel plates for PEM fuel cells that were produced in China during 2024 and 2025 have been coated in either an IC2000 or an IC500 machine delivered by Impact Coatings. We also have a strong position when it comes to noble metal coatings for electrolysers. And now we are going to use this position to focus on the SOFC market. So before going into Q4, let us talk about our strategy. Impact Coatings has built a strong and well established position within the PEM related applications. PEM-related applications, that is PEM electrolyzers for green hydrogen and PEM fuel cells mainly for mobility, converting green hydrogen into electricity. But the market for PEM and green hydrogen has not taken off as expected. So now we use the position and experience from PEM to enter the solid oxide fuel cells market. And also here, we aim to become the market leader. So those of you who listened to the capital market update in November knows that AI data centers consume a lot of energy and it's problematic to build power lines to those centers in a short time. Earlier this week, I had a lunch with the head of distribution division at Tekniska Verken, that is the local utilities company here in Östergötland. He confirmed the challenge with data centers and environment and legal framework they are acting from is not really designed for fast transitions such as the demand for power to AI data centers. According to him, it takes long time to build new power lines, much longer than building the data center itself. And this can also create competition and some friction in the local society when there's not enough power for all businesses. He didn't really have a solution, but to me, he confirmed the problem. One solution is high efficiency SOFC, solid oxide fuel cells, which convert natural gas into electricity, which can be used to power data center without interference with the local infrastructure. By using containerized SOFC power plants, which are easy and fast to deploy, this can also be done in time. However, SOFC stacks, they operate at high temperatures and contain a lot of stainless steel plates called interconnects. Stainless steel at high temperature evaporates chromium and chromium will kill the SOFC stacks. So to avoid chromium evaporation, the stainless steel interconnect plates needs coating. We provide solutions, machines and services for coating of stainless steel interconnect plates. The emerging market for SOFC systems is commercially driven and is expected to grow much faster than green hydrogen applications. We do have a strong position in the green hydrogen market and we are going to use that position to also grab the SOFC market. So we have been working with SOFC at low intensity for several years, but now it's time to scale up. Suddenly the world needs data centers and data centers need power. The electricity consumption of data centers is expected to double by 2030, and power supply is a major bottleneck to deployment of data centers. SOFC power has now reached commercial scale and containerized SOFC systems has the ability to bring data center online about three to four years before grid electricity is available. Testing has proven our coating performance and we are recognized as high quality supplier for interconnect coatings. So growing in this market is our main strategic focus right now. We are currently working with Ceres, one of the leading technology players in the SOFC industry. Ceres licenses its technology to Doosan in Korea, Delta Electronics in Taiwan, and Weishai in China, which are all major global companies. We can't yet say exactly how large this market opportunity will be, but the top-down analysis indicates several hundred machines in just a few years. And the picture on the right, that's actually a picture from outside and inside of Doosan's factory in Korea, where they are producing SOFC stacks. So it's a big factory. Well, you might ask, why do we start doing something new? Well, this isn't new. It's a natural step. From the strong position in the PEM fuel cell market, SOFC is the natural step. In terms of product market fit, it's a perfect match. SOFC components that are flat plates, and we are specialists in 2D objects, They require advanced multilayer coatings on both sides with different coatings on each side. And the more advanced requirements, the stronger the need for impact coatings. The plates also have exactly the right dimensions for our IC500 and IC2000 machines. This means we do not need to invest in new machine development. Another important aspect of the SOFC market is that each system requires more coated plates than a PEM fuel cell system. So higher volumes means higher revenue, and that is regardless of if it is through coating services or machine sales. So let's switch to Q4 highlights and full year highlights. But first, some words about the market and business context. And to put a quarter into context, 2025 has been a challenging year. Investment decisions have been delayed across several industrial sectors and growth in hydrogen-related applications has been substantially slower than what we anticipated a year or two ago. For impact coatings, this has meant limited demand for machines, which has directly impacted cash flow and liquidity during the year. At the same time, the organization has continued to execute well operationally, particularly within coating services. So the key message at this stage is that we have acted proactively to ensure that the company remains operationally strong and financially resilient in a difficult market environment. So we have during 2025 and in Q4 taken important actions to strengthen the foundation of the company. We completed a rights issue in the fourth quarter to strengthen liquidity. The rights issue was completed in a quite demanding capital market environment. The outcome was below our initial ambitions, but it provided an important liquidity contribution, 26.6 million before issue related costs. Together with the rights issue, we have taken several structural measures to adapt the company to the current market conditions. During the year 2025, we implemented cost reductions across the organization, including a reduced headcount and a range of efficiency initiatives. These measures will take full effect during 2026. In addition, we have a new metal supply agreement, which gives flexibility and have materially reduced the amount of capital that needs to be tied up in operations. There are a number of things in this agreement that gives the flexibility to improve working capital. I will not go into details, but I can say that it is about who owns the inventory. It's about payment terms and other things related to recycling of metals. We have also worked with working capital loans, both in China and in Sweden, and we have managed to get favorable terms. So taken together, these actions strengthen the foundation of the company and gives us better control and resilience. And we can see the effect of these measures in the Q4 numbers. Operating costs is reduced by seven and a half million compared to Q4 2024. Operating profit ended up at minus 3.3 million. And we closed the year with a cash balance of 37.4 million. Looking at more numbers, total net sales amounted to 17.6 million for the quarter. We had a strong quote in services, 15.3 million, which was the main contribution to total net sales. Order intake was also in line with net sales and order intake includes also new sampling customers, both in SOFC and iridium oxide. The order backlog at period end was 10.6 million, which gives a good start of the new year. There is 1.3 million on systems, which originates from revenue recognition of previous deliveries. Aftermarket has been slow, which reflects the lower activity at many of our system customers during 2025. But to stay efficient, we have used personnel from the support and from the assembly organization to strengthen coating services. On a rolling 12-month basis, it's obvious that we are affected by very low machine sales. However, we do see stable development in coating services, and historically, this has been a good indicator of upcoming machine orders. So we expect orders during the year in all four business areas, energy, automotive, electronics, and luxury goods. Looking at coating services, it can be mentioned that we doubled the customer deliveries in number of fuel cell plates in 2025 compared to 2024. The company does not typically report incremental business progress outside of these quarterly reportings. However, during the rights issue in Q4, we wanted to provide investors with the maximum information and announce more news than we normally do. So here are some of those news. More than a million dollars in orders from our big North American customer. A new low cost but still high performance coating delivered to a customer. We now meet the needle standard that is required by our Japanese sampling customers. Lindbergh, the luxury goods manufacturer, wants to buy one more machine. And as I said earlier, we have double the production in our Shanghai facility. If you add the production made by us and also by our machine customers in China, you can also clearly see that we are the market leader on the Chinese fuel cell market. We had a capital markets update on November 24, and this is a recap of the key points communicated. So focus on SOFC. We expect orders in all four segments and we expect continued growth in coating services. So now I leave it to Lena for the financial update.

Thank you, Jonas. So we start with the income statement and all amounts are in SEC million. And let's start with the quarterly figures. As Jonas mentioned previously, net sales for the quarter was 17.6 million, a decrease compared to the 42.4 million in Q4 last year. But in Q4 24, we had a coating system sales of 27 million. If we go to capitalized work for own accounts, it was 0.1 million this quarter compared to a negative 1.2 in Q4 24, which was a correction from previous quarters. Change in work in progress was 0.2 million and Q4 24 was 6.2. Other operating income was 5.2 million compared to 0.1 in Q4 last year. And this is mainly revenues from metal recycling in the subsidiary in China. So total revenue amounted to 23.0 million compared to 47.5 in Q4 24. The gross margin was 83% for the quarter compared to 55% in Q4 24, which then included machine sales. And we also have some other income with higher margins in Q4 25. If we go down to other external costs, there were minus 6.7 million compared to minus 9.1 in Q4-24. And in Q4, premises costs were actually lower compared to Q4-24 since we then had overlapping double rental costs and also costs for moving to the new facilities. Q4 2025 also had decreased costs for consumables, freight and consultants. And if we look at personal costs, they were minus 13.1 million compared to minus 18.7 in Q4 2024. And the number of FTE for the group by the end of the quarter was 50 compared to 66 in Q4, 24. So that's of course the main reason. If we look at depreciations, they increased to 2.2 million compared to 1.7 in Q4, 24. And this is mainly due to investments during 24. So the operating loss for the quarter was minus 3.3 million, which is a slight improvement compared to minus 3.7 in Q4 24. And it's a combination of lowering operating expenses and also better cross margin. We had interest expenses of minus 0.2 million, compared to an interest income of 0.2 in Q4 24. And in total, Q4 adds up to a net loss of minus 3.8 million compared to minus 3.1 in Q4 24. And if we look at full year, we see that the total net sales were 47.3 million compared to 109.9 million in 24. And again, the difference is due to the coating system sales in 24, which amounted to 74 million. Coating services sales, on the other hand, increased by 67% compared to 24. And in aftermarket sales, we had a decrease to 10.1 million compared to 14.3 with a main decrease in China. The total revenue for the full year was 73.5 million compared to 102.4 in 24. And the changes beside the sales were that we had a change in work in progress of plus 15.3 while we had minus 18.5 last year. And we also had the other income of 7.7 million this year, which was much lower last in 24. If we move down a bit to the gross margin, it was almost 62% for the full year, which is the same level as in 24. Other external costs were minus 23.9 million compared to minus 27.1 in 24. And here we can say that the increase in rental costs for the full year was compensated by lower costs for, for example, consulting, repair and maintenance, consumables and travel costs. Looking at personal costs for the full year 2025, they were minus 56.9 million compared to minus 61.7 in 2024. And as I mentioned, the decrease in FTE by the end of the year was significantly, 50 compared to 66. Depreciations increased to minus 8.2 million compared to minus 6.4 in 2024. Again, as of following the investments in coating machines during 2024. As for currency exposure, we had a foreign exchange loss of minus 1.5 million this year compared to an exchange gain in 2020. 2024 plus 1.0. Interest expenses were minus 0.4 million, which are interests for loans, compared to the interest income we had in 2024, plus 1.2 million. In total, this adds up to a net loss of minus 45.9 million for the full year 25 compared to the minus 29.6 in 24. And we move to the balance sheet, starting with fixed assets. We have intangible assets that increased in capitalized development costs, 3.3 million. As for tangible fixed assets, we have some investments for upgrade of our own machine and some installations and also other fixed assets in total 4.5 million. There are 9.9 million defined as long-term accounts receivables, a decrease from 16.3 million at the year end 24. If we look at inventory, raw materials decreased almost 40 million from 94.5 million to 54.7. And this is mainly noble metal inventories. Work in progress on the other hand, increased to 21.7 million compared to 7.7 by the end of 24. Receivables decreased by approximately 28 million, mainly due to received customer payments. And the outgoing cash balance by the end of the year was 37.4 million compared to 32.5 by the end of 24. And we will have a closer look on that in the cash flow statement. Equity increased by the loss for the year, but increased by the net proceeds from the right issue, of course. In long-term liabilities, we see the long-term part of the raised loans that I would see during China. And that was 0.7 million at the end of 25. Prepayment from customers have decreased. And this is mainly from repayments following a new commercial setup with one of our major customers. As for short-term liabilities, accounts payables decreased, but short-term liabilities have increased due to the loans raised during 2025, about 27 million by the end of 2025. The loans are mainly in our subsidiary in China, but also including 5 million in the parent company. Looking at the cash flow statement, the cash flow was of course negatively affected by the minus 45.2 million in operating loss after depreciation. Then after adjustments for non-cash items, cash flow from operations before change in working capital was minus 38.0 million compared to minus 22.2 last year. There was minus 1.8 million in negative cash flow effect from the increase in working capital. However, an improvement from the minus 50.7 in 24. And as mentioned at the previous slide, the positive effect was from decreased inventories and decreased receivables, but then there was a negative cashflow effect from the decrease in prepayments from customers. Cashflow from operations was minus 39.8 million compared to minus 72.9 from the same period last year. Investments were kept low during 2025 and as I mentioned, 4.5 million in tangible assets and then capitalized development costs of 3.3 million. So minus 7.8 in total compared to minus 16.7 in 2024. Then we have the cash flow from financing activities and that was 52.1 million. Proceeds from the rice issue in December were 26.6 million and then related costs to that of 3.2 million. And loans raised during the year amounted to 28.7 million. In total, this resulted in a positive cash flow of 4.4 million for the year compared to minus 89.7 in 24 years. And the closing balance of 37.4 million compared to 32.5 in 24. This was a financial update, which means that we move on to summary and outlook.